Bronkhorst ürünleri Türkiye satışı

Sensor type : AIR Range : 0.08...4 ln/min +15... Voltage: 24Vdc Analog output: 4-20mA Digital output : standard .

Split cable, length 3 meters 9-pin. Sub-D socket to 8-pin. Amphenol plug/socket To control and evaluate a Bronkhorst device via a Windows PC and therefore also for optimization or remote maintenance purposes.

Calibration curve 1: (0)... 0.2... 10 m3n/h air Calibration curve 2-8: Optional Inlet pressure: 7 bar (ü) Back pressure: 5 bar (ü) medium/ambient temperature: 20 °C Target value specification: analog Measurement accuracy: ± 0.5% of measured value ± 0.1% of final value* ATTENTION: The electrical connectors Must be mechanically according to Bronkhorst ATEX Cat3 installation procedure be protected Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: Analog, RS232 analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Input connection: 12 mm compression fitting Output connection: 12 mm compression fitting (others on request) Sealing material: Viton 51415 Parts in contact with the media: stainless steel 1.4404 (SS 316) Installation position: any position, horizontal from 10 bar Protection class: IP65, ATEX CAT 3, zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)

loose end/DIN8 male Order number 7.03.522 Length: 3m

Calibration curve 1: (0)... 0.1... 5 mln/min N2 Calibration curve 2-8: Optional Inlet pressure: 30 bar (a) Outlet pressure: 0... 25 bar (a) Medium/ambient temperature: 20 °C Setpoint specification: digital via RS232 Measurement accuracy: ± 0.5% of measurement value ± 0.1% of end value* Pressure level: PN 64 Interfaces: analog, RS232 Analog signal: 4... 20 mA Supply voltage: +15... 24 Vdc Mech Input connection: 1/8" compression ring Mech Output connection: 1/8" compression ring Sealing material: Viton 51415, impact plate valve: FFKM Default setpoint: digital 9-pin digital communication Sub-D: RS232 Custom IO setting: Deactivated, 0 Vdc (default) Depending on the sealing material, the Selection/configuration option off the device-internal database of 100 gases. Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any position, from 10 bars horizontally Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Calibration curve 1: (0)... 0.3... 15 mln/min N2 Calibration curve 2-8: Optional Inlet pressure: 30 bar (a) Outlet pressure: 0... 25 bar (a) Medium/ambient temperature: 20 °C Setpoint specification: digital via RS232 Measurement accuracy: ± 0.5% of measurement value ± 0.1% of end value* Pressure level: PN 64 Interfaces: analog, RS232 Analog signal: 4... 20 mA Supply voltage: +15... 24 Vdc Mech Input connection: 1/8" compression ring Mech Output connection: 1/8" compression ring Sealing material: Viton 51415, impact plate valve: FFKM Default setpoint: digital 9-pin digital communication Sub-D: RS232 Custom IO setting: Deactivated, 0 Vdc (default) Depending on the sealing material, the Selection/configuration option off the device-internal database of 100 gases. Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any position, from 10 bars horizontally Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Calibration curve 1: (0)... 0.07... 3.5 kg/h H2 Calibration curve 2-8: Optional Pressure: 5... 70 bar (ü) Medium/ambient temperature: 15 °C Measurement accuracy: ± 0.5% v. measurement value ± 0.1% v final value* Pressure level: PN 100, test pressure 1.5 x working pressure Interfaces: analog, RS232 analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Input connection: 12 mm clamping ring Output connection: 12 mm clamping ring Sealing material: Viton 51415 Parts in contact with media: stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 available as an option)

15 VDC/0.5 A supply 100... 240 Vac, 50... 60 Hz on 8-pin. DIN (female) Includes connection cable, length approx. 1.5 meters

Calibration curve 1: (0)... 0.1... 5 ln/min air Calibration curve 2-8: Optional Inlet pressure: 80... 150 bar (ü) Outlet pressure: 50... 120 bar (ü) Medium/ambient temperature: 20 °C Setpoint setting: analog via 0... 10 Vdc Measurement accuracy: ± 0.5% v. measurement value ± 0.1% v final value* Pressure level: PN 350, test pressure 1.5 x working pressure Interfaces: analog, RS232 analog signal: 0... 10 Vdc Supply voltage: + 15... 24 Vdc Input connection: 6 mm clamping ring Output connection: 6 mm clamping ring Sealing material: Viton 514162 Repeatability: better 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 bar Temperature limits: -10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Screwed into: Pos. 1 Pressure level: PN 200, test pressure 1.5 x working pressure Filter surface: approx. 5 sq cm pore size: 5 μm Mech. Input connection: 1/4" BSPP internal thread Mech. Output connection: 1/4" BSPP external thread Sealing material: Viton 51415 To screw into a flow meter/ controller Filter housing material: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C

Calibration curve: (0)... 0.1... 5 ln/min N2 Inlet pressure: 200... 250 bar (a) Outlet pressure: 1... 200 bar (a) Medium/ambient temperature: 20 °C Target value specification: analog via 4... 20 mA Measurement accuracy: ± 0.5% v. measurement value ± 0.1% v final value* Notes: The electrical connectors Must mechanical according to Bronkhorst- ATEX Cat3 Installation Procedure be protected Pressure level: PN 350, test pressure 1.5 x working pressure Interfaces: analog, RS232 analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Input connection: 1/4" clamping ring Output connection: 1/4" clamping ring Sealing material: Viton 514162 Parts in contact with media: stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 available as an option)