Bronkhorst ürünleri Türkiye satışı

Calibration curve 1: (0)... 0.2... 10 sccm N2 Calibration Curve 2-8: Optional Inform: 1,5 barue outlet pressure: 0 barue Medium/Ambient temperature: 20°C Setpoint default: Analog over 0... 10 Vdc Measurement accuracy: ±0.5% of measured value ±0.1% of final value * Pressure rating: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: Analog, RS232 Analog signal: 0... 10 Vdc Supply voltage: +15... 24 Vdc Connection input: 1/4 inch locking ring fitting Connection output: 1/4 inch locking ring fitting (others on request) Sealing material: Viton 51415 Repeatability: better 0.2% of reading Wetted parts: Stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 barue Temperature limits ፦10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Calibration curve 1: (0)... 40... 2000 sccm Calibration Curve 2-8: Optional Inform: 1,5 barue outlet pressure: 0 barue Medium/Ambient temperature: 20°C Setpoint specification: Digital via RS-232 Measurement accuracy: ±0.5% of measured value ±0.1% of final value * Pressure rating: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: Analog, RS232 Analog signal: 0... 10 Vdc Supply voltage: +15... 24 Vdc Connection input: 1/4 inch locking ring fitting Connection output: 1/4 inch locking ring fitting (others on request) Sealing material: Viton 51415 Repeatability: better 0.2% of reading Wetted parts: Stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 barue Temperature limits ፦10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Calibration curve 1: (0)... 0.3... 15 ln/min air Calibration curve 2-8: optional form: 7... 10 barue Backprint: 3... 6 barue Medium/ambient temperature: 20 °C setpoint specification: analogous above 4... 20 mA Measurement accuracy: ±0.5% v. measured value ±0.1% of final value* Pressure stage: PN 64, test pressure min. 1.5 x pre-pressure Interfaces: analog, RS232 Analog signal: 4... 20 mA supply voltage: +15... 24 Vdc Input connection: 1/4" compression fitting Connection output: 1/4" compression fitting (others on request) Sealing material: Viton 51415 Repeatability: better 0.2% of measured value Media wetted parts: stainless steel 1.4404 (SS 316) Installation position: arbitrary, horizontal from 10 barue Temperature limits ፦10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Measurement range:

Calibration curve 1: (0) ... 12 ... 600 ln / min Ar Calibration curve 2-8: Optional Pre-pressure: 15 ... 20 barg Outlet pressure: 5 ... 18 barg Medium / ambient temperature: 20 ° C Setpoint specification: analog via 4 ... 20 mA Measurement accuracy: Notes: consider a minimum delta-P of 1.7 bar (d) Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: analog, RS232 Analog signal: 4 ... 20 mA Supply voltage: +15 ... 24 Vdc Connection input: customer-specific Connection output: customer-specific Sealing material: Viton 51415 Repeatability: better than 0.2% of the measured value Wetted parts: stainless steel 1.4404 (SS 316) Installation position: any, from 10 barg horizontally Temperature limits: -10 ° C ... + 70 ° C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

Calibration curve 1: (0)... 20... 1000 ln/min N2 Calibration Curve 2-8: Optional Inform: 6 barue outlet pressure: ATM... 2 barue Medium/Ambient temperature: 20°C Setpoint default: analog Measurement accuracy: ±0.5% of measured value ±0.1% of final value * Pressure rating: PN 64, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Connection input: 1/2" BSPP internal thread Connection output: 1/2" BSPP female thread Sealing material: Viton 51415 Wetted parts: Stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 barue Protection class: IP65, ATEX CAT 3, Zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)

DIN 8 Buchse auf loses Ende, Länge 3 Meter

Calibration curve 1: (0)... 4.8... 240 m3n/h Calibration Curve 2-8: Optional Print: 1,8 barue Medium/Ambient temperature: 20°C Measurement accuracy: ±1.0% v.Measured value ±0.5% of final value * Production oil- and grease-free Output signal, setpoint: 4... 20 mA active, 4... 20 mA Supply voltage: +15... 24 Vdc Mech. Connection input: G 1" female thread Mech. Connection output: G 1" female thread Base body: Aluminium Pressure rating: 10 bar Sealing material: Viton 51415 Control/Evaluation: Analog, RS232 Electrical connection: 8 pin DIN for Power supply and RS232 Repeatability: ± 0.2% of final value Outside leakage rate: better 2 x 10E-8 mbar*l/sec He Installation position: any Temperature limits: 0 °C... +50 °C Protection class: IP65 (with and without display) Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available

Replacement for W1520544F *** Calibration curve 1: (0)... 1... 50 m3n/h O2 Calibration Curve 2-8: Optional Inform: 3 barue outlet pressure: 1 barue Medium/Ambient temperature: 20°C Setpoint default: analog Measurement accuracy: ±1.0% v.Measured value ±0.5% of final value * Manufacturing: oil- and grease-free Control valve: Mounted on equipment body Output signal, setpoint: 4... 20 mA active, 4... 20 mA Supply voltage: +15... 24 Vdc Mech. Connection input: G 1/2" female thread Mech. Connection output: G 1/2" female thread Base body: Aluminium Pressure rating: 10 bar Sealing material: Viton 51415 Control: Analog, RS232 Electrical connection: 8 pin DIN for Power supply and RS232 Repeatability: ± 0.2% of final value Outside leakage rate: better 2 x 10E-8 mbar*l/sec He Pressure Rating: PN10 for aluminium and PN20 for Stainless Steel Base Installation position: any Temperature limits: 0 °C... +50 °C Protection class: IP65 (with and without display) Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

Calibration curve 1: (0)... 0.5... 25 m3n/h O2 Calibration Curve 2-8: Optional Form: 2 barue outlet pressure: 1 barue Medium/Ambient temperature: 20°C Setpoint default: analog Measurement accuracy: ±1.0% v.Measured value ±0.5% of final value * Manufacturing: oil- and grease-free Control valve: Mounted on equipment body Output signal, setpoint: 4... 20 mA active, 4... 20 mA Supply voltage: +15... 24 Vdc Mech. Connection input: G 1/2" female thread Mech. Connection output: G 1/2" female thread Base body: Aluminium Pressure rating: 10 bar Sealing material: Viton 51415 Control: Analog, RS232 Electrical connection: 8 pin DIN for Power supply and RS232 Repeatability: ± 0.2% of final value Outside leakage rate: better 2 x 10E-8 mbar*l/sec He Pressure Rating: PN10 for aluminium and PN20 for Stainless Steel Base Installation position: any Temperature limits: 0 °C... +50 °C Protection class: IP65 (with and without display) Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

Calibration curve 1: (0)... 0.7... 35 g/s air Measuring Range: 2-8: Optional Pressure: 600 mbarue Medium/Ambient temperature: 20°C Measurement accuracy: ±0.5% of measured value ±0.1% of final value * Pressure rating: PN 100, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Connection input: 1/2 inch locking ring fitting Connection output: 1/2" locking ring fitting (others on request) Sealing material: Viton 51415 Wetted parts: Stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, Zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)

Replacement for M15202286B *** Calibration curve 1: (0)... 20... 1000 ln/min Ar Calibration Curve 2-8: Optional Inform: 2.5 MPa (g) outlet pressure: 0.6 MPa (g) Medium/Ambient temperature: 20°C Setpoint default: analog Measurement accuracy: ±0.5% of measured value ±0.1% of final value * Pressure rating: PN 64, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Connection input: 12 mm locking ring fitting Connection output: 12 mm compression fitting (others on request) Sealing material: Viton 51415 Wetted parts: Stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 barue Protection class: IP65, ATEX CAT 3, Zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)

Calibration curve 1: (0)... 0.16... 8 ln/min air Calibration curve 2-8: Optional Form: 210... 300 bara Back pressure: 0... 200 bara Medium/ambient temperature: 20 °C Setpoint specification: digitally via RS232 Measurement accuracy: ± 0.5% v. reading ± 0.1% v. full scale * Pressure rating: PN 400, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: +15... 24 Vdc Input connection: 1/4" compression fitting Output connection: 1/4" compression fitting (others on request) Seal material: Viton 514162 Repeatability: better than 0.2% of reading Wetted parts: stainless steel 1.4404 (SS 316) Installation position: arbitrary, from 10 bar bar horizontal Temperature limits: -10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 optionally available)

In Line Filter Druckstufe: PN 100, Prüfdruck 1,5 x Arbeitsdruck Filteroberfläche: ca. 5 qcm Porengröße: 20 μm Mech. Anschluss Eingang: 1/2" BSPP-Innengewinde Mech. Anschluss Ausgang: 1/2" BSPP-Außengewinde Dichtungsmaterial: EPDM 559291 Zum Einschrauben in einen Durchflussmesser/ -regler Material Filtergehäuse: Edelstahl 1.4404 (SS 316) Filtermedium: Sintermetall Temperaturgrenzen: bis +70 °C

In Line Filter Druckstufe: PN 100, Prüfdruck 1,5 x Arbeitsdruck Filteroberfläche: ca. 5 qcm Porengröße: 20 μm Mech. Anschluss Eingang: Kundenspezifisch Mech. Anschluss Ausgang: Kundenspezifisch Dichtungsmaterial: Kalrez 6375 Zum Einschrauben in einen Durchflussmesser/ -regler Material Filtergehäuse: Edelstahl 1.4404 (SS 316) Filtermedium: Sintermetall Temperaturgrenzen: bis +70 °C

Model Series : IN-FLOW • Fluid : Air • Range : 10 lt/min • Inlet Pressure : 230 bar(a) • Outlet Pressure : 224 bar (a) • Valve function : Normally Closed • Temperature : 20 °C • Seals : Viton • Connections : 6 mm OD copression • Output Signal : 4...20 mA sourcing (RS-232 0...100%) • Supply : +15...24 Vdc

Calibration curve 1: (0)... 0.1... 5 m³n/h CH4 pressure: 40 mbarg Medium/ambient temperature: 20 °C Mech. Connection: G 1/2" BSPP female thread