Bronkhorst ürünleri Türkiye satışı

Calibration curve 1: (0)... 0.8... 40 ln/min Ar Calibration curve 2-8: Optional Form pressure: 5 bar (ü) Outlet pressure: 0... 3 bar (ü) (calibrated to 0 bar (ü)) medium/ambient temperature: 20 °C Target value specification: analog over 4... 20 mA Measurement accuracy: ±1.0% v. measured value ±0.5% v. final value* output signal, set value: 4... 20 mA active, 4... 20 mA Supply voltage: +15... 24 Vdc Mech. Connection input: G 1/4" internal thread Mech. Outlet connection: G 1/4" internal thread Main body: aluminum Pressure level: 10 bar Sealing material: Viton 51415 Control: analog, RS232 Electrical connection: 8-pin DIN for Power supply and RS232 Repeatability: ± 0,2% of end value Leak rate to the outside: better 2 x 10E-8 mbar*l/sec He Pressure level: PN10 for aluminum base body and PN20 for stainless steel base Installation position: arbitrary Temperature limits: 0 °C... +50 °C Protection class: IP65 (with and without display) Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

Connection:Analog/RS232 9-pin D- connector(male)

Type: F-201CI-20K-AGD-33-V Calibration curve 1: (0)... 0.4... 20 ln/min N2 Calibration curve 2-8: Optional Inlet pressure: 10 bar (ü) outlet pressure: 1 bar (ü) Medium/ambient temperature: 20 °C Target value specification: analog via 4... 20 mA Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Input connection: 6 mm compression fitting Output connection: 6 mm compression fitting (others on request) Sealing material: Viton 51415 Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 bar Protection class: IP65, ATEX CAT 3, zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 available as an option)

Model Series : IN-FLOW • Fluid : Air • Range : 10 lt/min • Inlet Pressure : 230 bar(a) • Outlet Pressure : 224 bar (a) • Valve function : Normally Closed • Temperature : 20 °C • Seals : Viton • Connections : 6 mm OD copression • Output Signal : 4...20 mA sourcing (RS-232 0...100%) • Supply : +15...24 Vdc

Calibration curve: (0)... 0.2... 10 ln/min air Inlet pressure: 230 bar (a) outlet pressure: 224 bar (a) Medium/ambient temperature: 20 °C Target value specification: analog via 4... 20 mA Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Pressure level: PN 400, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Input connection: 6 mm compression fitting Output connection: 6 mm compression fitting (others on request) Sealing material: Viton 514162 Parts in contact with media: stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, zone 2 optionally possible Factory calibration certificate 3 points included, (5 points or ISO 17025 available as an option)

Calibration curve 1: (0)... 0.2... 10 m³n/h N2 Calibration curve 2-8: Optional Inlet pressure: 3.5... 4 bar (ü) outlet pressure: 0... 1 bar (ü) Medium/ambient temperature: 20 °C Target value specification: analog via 4... 20 mA Measurement accuracy: ± 1.0% v. measured value ± 0.5% v. final value * output signal, setpoint: 4... 20 mA active, 4... 20 mA Supply voltage: +15... 24 Vdc Mech Input connection: G 1/2" internal thread Mech Connection output: G 1/2" internal thread Base body: aluminum Pressure level: 10 bar Sealing material: Viton 51415 Control: analog, RS232 Electrical connection: 8-pin DIN for Power supply and RS232 Repeatability: ± 0.2% of the final value Outward leak rate: better 2 x 10E-8 mbar*l/sec He Pressure stage: PN10 for aluminum base body and PN20 for stainless steel base Installation position: any Temperature limits: 0 °C... +50 °C Protection class: IP65 (with and without display) Factory calibration certificate 3 points included, (5 points or DIN 17025 available as an option)

MINI CORI FLOW *** Replacement for M19206594A*** Measurement range: (0)... 2... 100 kg/h H2O Pressure: 2.5 bar (ü) Medium/ambient temperature: 20 °C Measurement accuracy: ± 0.2% v. M. plus zero point* Interfaces: Analog, RS232 Electrical connection: 8-pin amphenol Output signal: 4... 20 mA Supply voltage: +15... 24 Vdc Mech Input connection: 1/4" compression fitting Mech Output connection: 1/4" compression fitting, others on inquiry Material: SS316 Pressure level: PN 100 Repeatability: better 0.05% of the measured value Installation: low vibration Protection class: IP65, ATEX CAT 3, zone 2 optionally available Calibration certificate: included

Calibration curve 1: (0)... 0.004... 0.2 ln/min air Calibration curve 2-8: Optional Inlet pressure: 9... 10 bar (ü) outlet pressure: 0... 7 bar (ü) Medium/ambient temperature: 20 °C Target value specification: analog via 4... 20 mA Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Pressure level: PN 64, test pressure min. 1.5 x form Interfaces: Analog, RS232 Analog signal: 4... 20 mA Supply voltage: +15... 24 Vdc Input connection: 1/4" BSPP internal thread Connection output: 1/4" BSPP internal thread Sealing material: Viton 51415 Repeatability: better 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 bar Temperature limits: -10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 available as an option)

Calibration curve 1: (0)... 7.8... 390 m³n/h N2 Calibration curve 2-8: Optional Pressure: 4 bar (ü) Medium/ambient temperature: 40 °C Measurement accuracy: ± 1% of the final value* ATTENTION: The electrical connectors Must be mechanical in accordance with Bronkhorst ATEX Cat3 installation procedure Be protected Assembly between flanges: DN 50 Interfaces: Analog, RS232 Electr. Connection: 8-pin DIN Output signal: 4... 20 mA Supply voltage: + 15 Vdc... 24 Vdc, 100 mA plus 250 mA for combination with control valve Pressure level: PN 16 Sealing material: Viton 51415 Repeatability: better 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: horizontal Temperature limits: -10 °C... +70 °C Protection class: IP65, (ATEX CAT 3, zone 2 optional potential Centering rings for intermediate flange mounting: included Factory calibration certificate 3 points included, (5 points or ISO 17025 available as an option)

*** Replacement for M17211439C*** Calibration curve 1: (0)... 11... 550 m³n/h N2 Calibration curve 2-8: Optional Pressure: 4 bar (ü) Medium/ambient temperature: 40 °C Measurement accuracy: ± 1% of the final value* ATTENTION: The electrical connectors must be mechanical be protected in accordance with Bronkhorst ATEX Cat3 installation procedure Assembly between flanges: DN 80 Interfaces: Analog, RS232 Electr. Connection: 8-pin DIN Output signal: 4... 20 mA Supply voltage: + 15 Vdc... 24 Vdc, 100 mA plus 250 mA for combination with control valve Pressure level: PN 16 Sealing material: Viton 51415 Repeatability: better 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: horizontal Temperature limits: -10 °C... +70 °C Protection class: IP65, (ATEX CAT 3, zone 2 optional potential Centering rings for intermediate flange mounting: included Factory calibration certificate 3 points included, (5 points or ISO 17025 available as an option)

ATEX Zone2 CAT3 loose end/DIN8 male

in accordance with ATEX Cat.3 Zone II (II 3 G Ex ec IIC T4 Gc//II3 D Extc IIIC T70°C Dc) including ATEX protective cap (Art. 5.14.004) including ESI (Essential Safety Information) and CE declaration of conformity

Calibration curve 1: (0)... 0.5... 25 ln/min air Calibration curve 2-8: Optional Inlet pressure: 6 bar (a) outlet pressure: 4 bar (a) Medium/ambient temperature: 20 °C Target value specification: analog Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: Analog, RS232 Analog signal: 0... 10 Vdc Supply voltage: +15... 24 Vdc Input connection: 1/4" BSPP internal thread Connection output: 1/4" BSPP internal thread Sealing material: Viton 51415 Repeatability: better 0.2% of the measured value Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any, horizontal from 10 bar Temperature limits: -10 °C... +70 °C Factory calibration certificate 3 points included, (5 points or ISO17025 available as an option)

DIN 8 female

Pressure level: PN 100, test pressure 1.5 x working pressure Filter surface: approx. 5 qcm Pore size: 10 μm Mech. Input connection: 1/4" BSPP internal thread Mech. Connection output: 1/4" BSPP external thread Sealing material: Viton 51415 To screw into a flow meter/ controller Material filter housing: stainless steel 1.4404 (SS 316) Filter medium: sintered metal Temperature limits: up to +70 °C