Bronkhorst ürünleri Türkiye satışı

Calibration curve 1: (0)... 0.2... 10 mln/min H2 Calibration curve 2-8: Optional Form pressure: 3000 mbar (a) Outlet pressure: 5... 1000 mbar (a) medium/ambient temperature: 25 °C Target value setting: digitally via flow bus Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Manufacturing: free of oil and grease Pressure level: PN 64, test pressure 1.5 x working pressure Sensor range: Nominal measurement range (air) 10 mln/min FLOW-BUS valve at rest, RS232 output signal, set value: 0... 5 Vdc Supply voltage: +15... 24 Vdc Mech. Connection input: 1/4" VCR, male Mech. Output connection: 1/4" VCR, male Sealing material: Kalrez 6375 Pressure level: 64 bar Parts in contact with media: stainless steel 1.4404 (SS 316) Metallically sealed on the outside Installation position: any position, horizontal from 10 bar Surface quality:/on request: Ra 0.2... 0.6 μm/0.1... 0.2 μm Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

Calibration curve 1: (0)... 1... 50 mln/min N2 Calibration curve 2-8: Optional Form pressure: 3000 mbar (a) Outlet pressure: 5... 1000 mbar (a) medium/ambient temperature: 25 °C Target value setting: digitally via flow bus Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Manufacturing: free of oil and grease Pressure level: PN 64, test pressure 1.5 x working pressure FLOW-BUS, RS232 interfaces Analog signal: 0... 5 Vdc Supply voltage: +15... 24 Vdc Connection input: 1/4" VCR, male Output connection: 1/4" VCR, male Sealing material: Kalrez 6375 Pressure level: 64 bar Parts in contact with media: stainless steel 1.4404 (SS 316) Metallically sealed on the outside Installation position: any position, horizontal from 10 bar Surface quality:/on request: Ra 0.2... 0.6 μm/0.1... 0.2 μm Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

Inlet pressure: 200... 1000 mbar (a) (calibrated for 1000 mbar (a)) Outlet pressure: 0.1 mbar (a) Flow rate: 0.2... 10 mln/min 20% O2, 20% H2, 20% N2, 20% C2H4, 20% CO2 (% in mol%) Standard volume: 250 ml Target value setting: digitally via flow bus medium/ambient temperature: 25 °C Measurement accuracy: ± 0.5% of end value* Manufacturing: free of oil and grease Pressure level: PN 64, test pressure 1.5 x working pressure FLOW-BUS valve at rest, RS232 output signal, set value: 0... 5 Vdc Supply voltage: + 15 Vdc... 24 Vdc, 100 mA plus 250 mA for combination with control valve Mech. Connection input: 1/4" VCR, male Mech. Output connection: 1/4" VCR, male Sealing material: metallic, plunger KALREZ Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: arbitrary Measurement and control range: 1:5 Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)

calibration curve 1: (0)... 0.2... 10 mln/min 20% O2, 20% H2, 20% N2, 20% C2H4, 20% CO2 (% in mol%) Calibration curve 2-8: Optional Pressure: 5... 1000 mbar (a) medium/ambient temperature: 25 °C Measurement accuracy: ±0.5% v. measured value ±0.1% v. final value* Manufacturing: free of oil and grease Pressure level: PN 64, test pressure 1.5 x working pressure Sensor range: Nominal measurement range (air) 10 mln/min FLOW-BUS valve at rest, RS232 output signal, set value: 0... 5 Vdc Supply voltage: +15... 24 Vdc Mech. Connection input: 1/4" VCR, male Mech. Output connection: 1/4" VCR, male Sealing material: Kalrez 6375 Pressure level: 64 bar Parts in contact with media: stainless steel 1.4404 (SS 316) Metallically sealed on the outside Installation position: any position, horizontal from 10 bar Surface quality:/on request: Ra 0.2... 0.6 μm/0.1... 0.2 μm Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

Basic version: desk case 3 HE, 14 TE Bracket: without handles Power supply: 100... 240 Vac, 50/60 Hz/24 Vdc Bus connection: FLOW-BUS - 00: blind plate

5 x RJ45 socket to 30 cm cable with RJ45 plug

to connect individual digital flow regulators to BHT flow bus. To feed in the power supplies or suitable for connecting control units

for the start of the BUS system, RJ45

for terminating the BHT-BUS system, RJ45

RJ45 plug to RJ45 plug

RJ45 plug to RJ45 plug

separates the individual voltage potentials of the BUS system among themselves

- High-quality USB to COM port adapter - Connector 1: USB A male - Connector 2: RS232 (serial) male - Fastening with knurled screws - Specifications in accordance with USB 2.0 standard

for Bronkhorst devices with protection class IP40, length 3 meters For control, evaluation and optimization and Remote maintenance of a Bronkhorst device via a Windows PC. 9-pin 9-pin Sub-D plug/socket Sub-D socket

Flowbus/Modbus M12 socket

5-pin male plug/M12

1 x M12 jack/2 x M12 plug (IP65) to connect individual digital flow controllers to the BHT flow bus. To feed in the power supplies or to connect Control units suitable (IP65).

DIN 8 female connector

Tipo: F-202AI-M20-MGD-HH-V Calibration curve 1: (0)... 1.2... 60 ln/min 50 vol% C3H8 in C4H10 1 (vol% at 25 °C and 1.013 bar (a)) Calibration curve 2-8: Optional Pressure: 2 bar (ue) Outlet pressure: 0.5 bar (ü) Medium/ambient temperature: 50 °C Target value specification: digital via Modbus Measurement accuracy: ± 0.5% of measurement value ± 0.1% of end value* Pressure level: PN 64, test pressure 1.5 x working pressure Interfaces: Modbus, RS232 Analog signal: 4... 20 mA Supply voltage: + 15... 24 Vdc Input connection: 10 mm clamping ring Output connection: 10 mm compression ring Sealing material: Viton 51415 Parts in contact with media: stainless steel 1.4404 (SS 316) Installation position: any position, from 10 bars horizontally Protection class: IP65, ATEX CAT 3, zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)