Bronkhorst ürünleri Türkiye satışı

WETTED PARTS: SS316L/Viton

Calibration curve 1: (0)... 0.3... 15 ln/min Air Calibration curve 2-8: Optional Pre-pressure: 5... 8 bar (ü) Outlet pressure: 1... 4 bar (ü) Medium/ambient temperature: 20 °C Setpoint specification: analog over 4... 20 mA Measurement accuracy: ± 1.0% v. Measurement ± 0.5% of final value * Board Type: Analog, RS232 Output signal, setpoint: 4... 20 mA Power supply: +15... 24 Vdc Mech. Input connection: G1/4" internal thread according to ISO1179-1 Mech. Output connection: G1/4" internal thread according to ISO1179-1 Sealing material: FKM 51415 Main body: aluminum Default setpoint setting: analog Digital communication via 8DIN: RS232 Customer-specific default: Deactivated, 0 Vdc (default) Repeatability: ± 0.2% of final value Outward leak rate: better 2 x 10E-8 mbar*l/sec He Pressure level: PN10 for aluminum base body and PN20 for stainless steel body PN30 upon request Installation position: any Temperature limits: 0 °C... +50 °C Protection class: IP65 (with and without display) Factory calibration certificate 3 points included, (5 points or DIN 17025 optionally available)

MINI CORI FLOW Measurement range: 0.8... 40 kg/h aroma* * (density: 1100 kg/m³, viscosity: 1 mPa.s) Pressure: 10 bar (g) Medium/ambient temperature: 50 °C Measurement accuracy: ± 0.2% of meters plus zero point * Setpoint specification: analog over 4... 20 mA Notes: with adjusted 0... 10 Vdc actuator signal for operation in conjunction with a pump Interfaces: analog, RS232 Electrical connection: 8-pin amphenol output signal: 4... 20 mA Supply voltage: +15... 24 Vdc Mech. Input connection: 12 mm clamping screw connection Mech. Output connection: 12 mm clamping screw connection Material: SS316 Pressure level: PN 100 Repeatability: better than 0.05% of the measurement value Installation: low vibration Protection class: IP65, ATEX CAT 3, zone 2 optional Calibration certificate: included

large display (1.8” TFT display) - Direct or percentage display of measured values - manual setpoint setting - integrated counter function - Fluid/measuring point number display - Protection class: IP65 - Power supply: 15-24 Vdc - Use for MFM/MFC with RS232 and ext. signals Connection via 8-pin T-plug DIN - including installation kit for pipe/wall mounting

Tipo: F-142MI-IGD-00-W Calibration curve 1:3... 150 ln/min Ar Calibration curve 2-8: Optional Pressure: 550 bar (a) Medium/ambient temperature: 20... 60 °C Measurement accuracy: ±0.5% v. Measurement ± 0.1% of final value * Pressure level: PN 650, test pressure 1.5 x working pressure Interfaces: Ethernet/IP, RS232 Electrical connection: M-12 male, analog 8-pin. DIN output signal: 4... 20 mA Supply voltage: + 15 Vdc... 24 Vdc, 100 mA plus 250 mA for combination with control valve Mech. Input connection: Swiss M20x1.5 Mech. Output connection: Swiss M20x1.5 Sealing material: Viton 514162 Parts in contact with media: stainless steel 1.4404 (SS 316) Protection class: IP65 - ATEX CAT 3, zone 2 optional Factory calibration certificate 3 points included, (5 points or ISO 17025 optionally available)

RS-232 split cable for Bronkhorst devices with protection class IP40, length 3 meters For control and evaluation as well as optimization and Remote maintenance of a Bronkhorst device via a Windows PC. 9-pin Sub-D plug/socket to 9-pin Sub-D jack Art. no.: 7.03.366