Çizgi prob modülü DGMa
Due to its modular design, the continuation encoder dGMA can
can be flexibly adapted to the measuring points. The module with the
variable area flow measurement, can be measured with scale l/h or gph
as well as with or without reed contact for flow monitoring
be chosen.
The modules for measuring chemical measures can be accessed via
the identcode ordering system can be selected.
The modules PG 13.5 are for recording pH, redox,
Temperature and conductivity sensors (with PG13.5 thread)
suitable. The maximum number here is: 4 modules.
Sensors with screw thread can be inserted into the 25mm modules
R 1 inch (all amperomtric sensors such as chlorine,
chlorine dioxide, ozone, bromine, or hydrogen peroxide sensors)
be mounted. The maximum number here is: 4 modules
Each flow encoder is equipped with a double-sided ball valve for
shut-off and flow setting, as well as a simple
sampling tap equipped.
Material: PVC transparent (modules)
seals: FKM
Calibration cup: PP
Mounting plate: PVC white
Max. temperature 60°C
pressure max. 6.0 bar @30°C, 1.0 bar @ 60°C
recommended flow: 40 l/h (max. 80 l/h)
Protection class: IP 65
Typical applications are applications in drinking,
Swimming pool water as well as water of similar quality without solids.
Options (not included):
Convenient sampling ball valve for DGMA
Order number: 1004737 (for module PG13.5)
or 1004739 (for module 25 mm)
potential plug for liquid potential equalization,
Order number: 791663
connection cable for liquid potential equalization,
Order number: 818438
Identcode: DGMA301T000
Series: DGMA - DGMA series
Flow measurement module: 3 - flow m , sensor, scale l/h
Number of modules Pg 13.5:0 - without module Pg 13.5
Number of modules 25mm: 1 - one module 25mm
Main material: T - PVC transparent
Sealing material: 0 - Viton A
Connections: 0 - hose 8x5
Version: 0 - With logo with mounting plate
