motor dozaj pompası
Material S3CB
Sigma 3 control type B
The Sigma/ 3 control type motor dosing pump is a very robust
motor diaphragm dosing pump and ensures with its patented
Multi-layer safety membrane for a high level of process reliability.
Membrane rupture is standard with an optical
Membrane rupture indicator shown, but can be used as a selected option
be equipped with signaling via contact.
The Sigma control type series is an intelligent pump with
a 1pH wide-range power supply, 100-230 volts, 50/60Hz
for safe use in many applications and offers a
Wide range of drive and control variants.
The removable control unit with large illuminated display
offers a high level of ease of use. As control variants
In addition to Pulse Control (including batch operation), can the
Version via analog signal (0/4-20mA), PROFIBUS or CANopen
be selected as an option in the ID code.
In addition, the motor dosing pump can be equipped with relay modules
(e.g. central fault message or 4-20 mA output) equipped
become.
The stroke length adjustment can be in the stroke adjustment range of 0-100%
can be set manually in 1% steps and achieves a
Reproducibility of dosing accuracy of +/- 2%
in the range of 30 to 100% of the stroke length.
(Observe the instructions in the documentation on this).
The plastic housing protects against corrosion and enables
protection class IP65.
Total output range of the S3Cb series: 182-1,040 l/h, 12-4 bar
(flow rate/pressure see offered pump type/identification code)
Can be used for almost all liquid chemicals thanks to the
available PVDF and stainless steel material variants.
Our Sigma series are also available in certain versions
with an FDA-compliant certificate or an EAC certificate
deliverable. The “left conveyor unit” variant offers
additional adjustment options for special installation situations.
ID code: S3CBH040830PVTS130UA01000EN
Series: S3CB - Sigma 3 control type version B
Drive type: H - main drive
Pump type: 04083 - 4 bar, 1040 l/h
Dosing head material: PV - PVDF
Seal material: T - PTFE seal
Displacer material: S - multi-layer membrane opt. Anzeig
Dosing head version: 1 - without vent, with valve
Hydraulic connection: 3 - U-nut & E-part PVDF
Version: 0 - with PM logo
El. Power supply: U - 1ph, 100-240V, 50/60Hz, 420W
Cable and plug: A - 2m Europe
Relay function: 0 - without relay
Control variant: 1 - Manual+Cont. +p.c+analog+DOS.pr
Overpressure cut-off: 0 - without overpressure cut-off
Control unit: 0 - HMI m.Click Wheel (0.5m cable)
Access code: 0 - or access control Ü.-awake. dyn.
Languages: EN - English
Approval: 01 - CE
Frequency: 50/60Hz
Voltage: 100-240V
Power: 420W
Protection class: IP65
flow rate: 1040l/h
Back pressure: 4bar