Beamex ürünleri Türkiye satışı

PGHH - Complete manual hydraulic pump kit It replaces Beamex PGXH, of which it has equivalent characteristics. • Available only in a kit version complete with case and accessories • Pressure generation range: 0/ 700 bar • Generation fluid: mineral oil/ distilled water • Pressure outputs: G¼” female for connection to external Beamex pressure modules and G¼” female with special 1215 male connector for high pressure fittings • Dimensions and weight: 265x160x120mm - 1.3 kg • Included in the delivery: PGHH pump, rigid carrying case, high pressure cable 1 meter long with 2 female 1215 connectors and 1 ¼” NPT male adapter to 1215 male connection for connection to the pump of the device under test, case with spare o-rings, bottle for liquid media filling and user manual in English. • Additional specifications as per the technical bulletin

630 bar Set includes: - 3 x 1.0 m 630 bar hoses (7021390) - junction block (T-block) with 3 x Bx 1215 male fittings that can used to combine the hoses to form a T-hose, total length 2 m - pressure fitting Bx 1215 male to G1/4" B female (7108650) for external high pressure modules (EXT60...EXT600) or panel-mounted modules P250 or P600 - pressure fitting Bx 1215 male to 1/4" NPT male (7108560) for a device under test

• Temperature generation: 50/660°C • Thermal stability: up to 0.02°C • Warm-up time from 50 to 660°C: 15 minutes • Cooling time from 660 to 50°C: 35 minutes • Extended temperature uncertainty with internal sensor: up to 0.2°C • Measurement and generation of voltage, current and resistance signals • Measurement and generation of frequencies and pulses • Complete switch test • Integrated measurement loop power supply • Measurement and simulation of thermocouple signals (13 types) and temperature resistors (14 types) • Possibility to customize temperature resistors by inserting Callendar Van correction coefficients Dusen • Possibility to connect an unlimited number of interchangeable external pressure modules: measuring ranges selectable between +/- 10 mbar and 0-1000 bar, with accuracies up to +/- 0.005% f.s. + 0.01% reading. (Yes see technical bulletin for specific details for each module) • Possibility of an integrated barometric reference module, for automatic conversion of pressure measurements Relative in absolute • Total possibility of calibration and configuration of Hart instrumentation through a digital communication module optional integrated • Total possibility of calibrating and configuring FOUNDATION Fieldbus or Profibus PA instrumentation, through optional integrated digital communication module • Total documentation of the tests through integrated data memory, interfaceability to computers and software of optional CMX test management and Logical cloud software • Two simultaneous measurement channels for thermocouple measurements, with universal connection for thermocouples (connectors/mini-plug) and three channels for temperature resistors (including one for an external sample probe) • Large graphic touch screen display (5.7”) with backlight and simultaneous display of parameters in measurement and generation/simulation with multilingual user interface • 5 different operating menus on the user interface (depending on the options and modules installed): generator of temperature, calibrator, calibrator with documentation of the results, datalogger and digital communicator thorough • Dimensions and weight: 322x180x298 mm, 8.6 kg • Power supply: 230V +/ -10%, 50-60 Hz. (the multifunction calibrator section can also work on battery internal rechargeable) • Possibility to combine complete kits of external manual pumps (pneumatic and hydraulic) for generation of reference pressures • Supplied complete power cable, set of test cables and tweezers, USB cable, removal device inserts and calibration certificate issued by an accredited FINAS (EA) European Accreditation equivalent laboratory to national standards) and operating manual. • Note: For the correct operation of the instrument, the use of an MH insert is necessary

B8066660 Battery pack for MC5 calibrator

for MC6; Model: MC6HART

BC05-B For MC2