Badger Meter ürünleri Türkiye satışı

Identisch wie G 30499, Art. Nr. 1004386 Anschluss : 1/4" G Innengewinde Ventiloberteil : Standard, 1.4571 Spindelabdichtung : Dachmanschetten, Material PTFE/PFA Innengarnitur : Grösse "G" linear, Kvs=0,17 : Kegel und Sitz aus 316 SST Antrieb : Pneumatisch, Feder schließt, Typ 754, ATO Signal 0,2-1,0 bar Stellungsregler : i/p Typ Sipart PS2, Signal 4-20mA, Anschluß G1/4, Versorgung 4,0 bar, mit HART-Kommunikation,analoge Stellungsrückmeldung 4-20mA Montagefett : Silikonhaltig "Dow 111"

LM OG 1/2" BSP PVC 1.4305 Vectra Viton 1-35 l/min with reed contact 100 PPL Oval wheel meter type OG_TI_100 in PVC version Material and technical data Measuring principle: oval wheel counter Housing: PVC plastic Lid: 304 stainless steel Oval wheels: plastic Vectra (LCP plastic) O-ring: Viton Measuring range: 1-35 l/min Measurement accuracy: +/- 0.5% of reading Viscosity range: 1-2000mPas p-max: 10 bar t-max: 45°C Pulse output: through reed contact 100 pulses/ litres Installation length: 82 mm Connection: female thread R 1/2"

MID M 5000 with ISO flange DN 100 hard rubber Hastelloy 2 D-Cells type “Magnetoflow M5000 M”. Transducer: type 6 Process connection: flange EN 1092-1/St 37 DN/PN: 100/PN 16 *Measuring range: 0.85 - 280 m3/h Installation length:!! special length 250 mm!! Lining: hard rubber max. temp.: 80 °C Electrodes: measurement and idle electrodes electr. -Material: Hastelloy C Case: St. 37 grey lacquered Transmitter: type M5000 M Assembly: built-up version Software language: English/German * Measurement units: metric * Final Value Scale: Standard (2.5 m/s) Pulse output: open collector * Pulse rate: 1 PPL LCD display: 4-line/20 digits Flow rate indicator: 8 digits (uni/bidirectional) 2 totalizers: 8 digits Protection type: IP 67 Auxiliary power: 1 battery pack, 2 D-cells Min.conductivity: 20 micros/cm Measurement accuracy: +/- 0.4% of measured value

MID M 5000 with ISO flange DN 100 hard rubber Hastelloy 4 D-Cells type “Magnetoflow M5000 M”. Transducer: type 6 Process connection: flange EN 1092-1/St 37 DN/PN: 100/PN 16 *Measuring range: 0.85 - 280 m3/h Installation length:!! special length 250 mm!! Lining: hard rubber max. temp.: 80 °C Electrodes: measurement and idle electrodes electr. -Material: Hastelloy C Case: St. 37 grey lacquered Transmitter: type M5000 M Assembly: built-up version Software language: English/German * Measurement units: metric * Final Value Scale: Standard (2.5 m/s) Pulse output: open collector * Pulse rate: 1 PPL LCD display: 4-line/20 digits Flow rate indicator: 8 digits (uni/bidirectional) 2 totalizers: 8 digits Protection type: IP 67 Min.conductivity: 20 micros/cm Measurement accuracy: +/- 0.4% of measured value Supply: battery operated, lithium batteries 3.6 volts (internal) with internal battery pack 4 D-Cells

Vision 1000 - 2F66 Trogamid with DIN device socket with power socket Housing: Trogamid Rotor: PA12 ferrite Bearing: PTFE/graphite Measuring range: 0.1 - 2.5 l/min Accuracy: +/- 3% of the value Pulse tap: Hall generator p-max: 25 bar t-max: 100 °C Connections: G 1/4" El. Connection: pin plate with 3 spade connectors (2.8 x 0.5) and DIN plug, EN 60529 bore: 5 mm Installation length: approx. 45 mm Installation position: arbitrary K-factor: Approx. 22000 pulses/liter Power supply: 5-24 VDC

FLANGE DIN 2501 4600 POS 70

Design temperature: 450 °C Design pressure: 380 bar Flow rate: 0.1 kg/s Function: pneumatic on/off Dimensions: ½" The TAG (valve name) is: UVo-21603

RCDL Material and technical data: Housing: bronze Measuring chamber: Noryl (PPO) seal Buna Measurement accuracy: 3-100 l/min Measurement accuracy: +/- 1.5% of the value p-max: 10 bar t-max: 50°C Connection: R 1" external Installation position: horizontal, standing sensor NPN Pulse sequence approx. 52.4 PPL

MID Amplifier board-AC_SERVICE M1000 230VAC supply 2019 release Amplifier board M1000 VAC Electrically calibrated for service

PPO Buna PFT-2 Reedkontakt Nutating disc meter Model RCDL M70, with pulse transmitter PFT-2. Materials and technical data; Housing: Bronze Chamber: Noryl (PPO) O-Rings: Buna Flowrange : 4-265 l/min Accuracy : +/- 1,5 % of value p-max: 10 bar t-max: 50 °C Connection: Threads 1 1/4" male Laylength: 273 mm Pulseoutput : By reedswitch 12,3 PPL unscaled K-Factor:

Shutter type: globe ;Nominal diameter: NPS 1/2 (DN 15) ;ASME B1.20.1 NPT-M thread ;max. allowable: 1700 psi ;body material: AI AISI 316 ;internal types: obtur. piston type ;trim material: AISI 316 plug-seat w/stellite ;flow characteristic: linear ;flow capacity: integral passage ;Cv 1.25 ;class I ;with actuator: pneumatic ;actuator type: w/return spring, air closes ; stainless steel class body ;

;Shutter type: globe ;Nominal diameter: NPS 1/4 (DN 8) ;ASME B1.20.1 NPT-M thread ;max. permissible: 1000 psi ;body material: AI AISI 316 ;internal types: obtur. piston type ;trim material: AISI 316 plug-seat w/stellite ;flow characteristic: linear ;flow capacity: integral passage ;Cv 0.006 ;class I ;with actuator: pneumatic ;actuator type: with spring return, air opens ;body stainless steel grade

;Shutter type: globe ;Nominal diameter: NPS 1/4 (DN 8) ;ASME B1.20.1 NPT-M thread ;max. permissible: 1000 psi ;body material: AI AISI 316 ;internal types: obtur. piston type ;trim material: AISI 316 plug-seat w/stellite ;flow characteristic: linear ;flow capacity: integral passage ;Cv 0.05 ;class I ;with actuator: pneumatic ;actuator type: with spring return, air closes ;body stainless steel class

;Shutter type: globe ;Nominal diameter: NPS 1/4 (DN 8) ;ASME B1.20.1 NPT-M thread ;Max. allowable: 1700 psi ;body material: AI AISI 316 ;internal types: obtur. piston type ; material of trim: obtur. AI AISI 316 c/stellite ; flow characteristic: linear ; flow capacity: integral passage ; Cv 0.32 ; class I

228 BR 20 — 0 — 5 — 1 — 2 — 1 — 1 STYLE 28 - Tea mounted insert sensor MATERIALS BR - Brass SIZE 20 - 2 in. ELECTRONICS HOUSING 0 - PPS ELECTRONICS 5 - Standard flow (DEFAULT) O-RING 1 - EPDM (STANDARD) SHAFT 2 - Tungsten carbides (standard) IMPELLER 1 - nylon (standard) BEARING 1 - UHMWPE (DEFAULT)

BR 220 Type 220 - BR - 00 - 0 - 5 - 1 - 1 - 1 STYLE 20 - Standard flow MATERIALS BR - Brass SIZE 00 - Insert style for pipe sizes 3 in and up ELECTRONICS HOUSING 0 - PPS ELECTRONICS 5 - Standard flow (DEFAULT) O-RING 1 - EPDM (STANDARD) SHAFT 2 - Tungsten carbides (standard) IMPELLER 1 - nylon (standard) BEARING 1 - UHMWPE (DEFAULT)

Based on 249502 Valve body: passage, cast, material 316SST Connection: 1/2" NPT female thread Valve top: standard, material 316SST Spindle sealing: roof sleeves, REK 1A for reduced emission Inner set: size “A” =%, Kvs 1.88 : 316 SST cone and seat Actuator: Pneumatic, spring close, type 754, ATO signal 0.2-1.0 bar