Badger Meter ürünleri Türkiye satışı

Lube oil meter 1/2 ", reed contact 100 Imp./Liter Built-in meter with pulse generator for lubricating oil Materials and technical data Measuring principle: oval wheel counter Housing: aluminum Oval wheels: plastic (LCP) Seal: Buna Measuring range: 1 - 35 l / min Measurement accuracy: ± 0.5% of the measured value Viscosity range: 8-5000 mPas p-max: 100 bar t-max: 50 ° C Protection class: IP 42 Connection: 1/2 "BSP internal thread Pulse generator (blue) Pulse output: 1x100PPL, reed

*** Ersatz für VL1610A038 *** 1/2" Aktuator Typ: 754 Ausführung: pneumatisch, n.c. (ATO) Signal: 6-30 psi Anschluss: 1/4 "NPT Innengewinde Material: Aluminiumgehäuse, Epoxidbeschichtet

Typ RC 200 1" RCV TYPE 200 Body :Globe casted, 316SST Connection :1" NPT internal threads Bonnet :Heavy Duty guided, 316SST Packing :PFA/TFE CV-ring Innervalve :Size "6.0" =%, Cvs=6,0, HD-guiding Inn.material :Plug stellite / Seat stellited 316SST Actuator :Electric actuator Type HH-500 SBA06-4, 2kN 230 VAC, 3 Point Control, Protection Class IP65 2 additional Limitswitches Stainless Steel coupling,-coloumns

Protective ring from old calibration electronic Register.

PG150 Protective cap for LM OG meter

PG151 for LM OG Counter Protective cap (old)

Series 380 2" polycarbonates pulse EPDM Tungsten Stainless steel Ktron

RCDL M25 1" PPO Buna PFT-2E Hall Sensor materials and technical data; Housing: Nylon Measuring chamber: Noryl (PPO) O-rings: Buna Measuring range: 1-100 l/min Measurement accuracy: +/- 1.5% of value p-max: 10 bar t0-max: 50 °C Connection: R 1" outside Installation length: 190 mm Installation position: horizontal, upright Pulse output: by open collector: approx. 52.4 PPL, NPN Power supply: 6-24 VDC

167631 Type Vision 2008 2F66 0.5 - 7.5 l/min Trogamid with DIN devices outlet Vision 2008 2F66-DIN 565-163-2F66 turbine measuring mechanism type Vision 2008 2F66 with Power socket Materials and technical data: Case: Trogamid Rotor: PA12 Ferrite Bearing: PTFE/graphite Measuring range: 0.5 - 7.5 l/min Measurement accuracy: +/- 3% of measured value Impulse tap: Hall generator p-max: 25 bar t-max: 100 °C Connections: G 3/8" El. Connection: pin plate with 3 flat connectors (2.8x0.5) and DIN plug, EN60529 Installation length: 55 mm Installation position: Any K-factor: 4700 pulses/litre Power supply: 5-24 VDC

167611 Vision - Turbine Measurement Model Vision 3012 - 4F17 5 - 65 l/min Trogamid with Connector (DIN) Vision 3012 4F16-DIN 56422-163-4F16 Materials and technical data: Case: Trogamid Rotor: Trogamid Measuring range: 5 - 65 l/min Measurement accuracy: +/- 3% of value Impulse tap: Hall generator p-max: 25 bar t-max: 100 °C Connections: G 3/4" El. Connection: pin plate with 3 flat connectors (2.8x0.5) and DIN plug, EN 60529 Installation length: 75 mm Installation position: Any K factor: approx. 210 pulses/litre Power supply: 5-24 VDC

Interior fittings: size "B" linear, Kvs 1.70: Cone and seat made of 316 SST Surcharge for extension Spindle sealing: V-rings, material PTFE / PFA Housing seal: standard, material 316SST

Valve housing: Passage, cast, Material 316SST Connection: 1/2" NPT internal thread

without pulse output liquid meter RCDL M25 with LCR - Display Materials and technical data: Housing: Nylon Measuring chamber: Noryl (PPO) O-rings: Viton Measuring range: 1-100 l/min Measurement accuracy: +/- 1.5% of value p-max: 16 bar t-max: 50 °C Connection: R 3/4" outside Installation length: approx. 190 mm Installation position: horizontal Display 1: Resettable totalizer or : flow meter programmable, : format xxxx.x. Display 2: Non-resettable totalizer, : 14 digits Memory Display: EEPROM, Data Retention chez : Battery replacement Units: Litres (Gallons, Pints, Quarts) Temperature: 0-70°C Correction factor: 0.5000-2.0000 Power supply: 3 VDC lithium CR 1/2 AA Degree of protection: IP 64 (front side)

14" extension, material 316SST spindle sealing: roof collars, Material PTFE/PFA : cone and seat made of 316 SST Actuator: Pneumatic, Spring Closes, Type 754, ATO signal 0.2-1.0 bar

Incl. pressure gauge

167744 Turbine Measurement Model Vision 1000 - 2F66 1.4401 PTFE with DIN device socket Vision 1005 2F66-DIN 56133-2F66 turbine transmitter type Vision 1000 - 2F66 with Power socket Materials and technical data: Housing: Inox 1.4401/AISI 316 Rotor: PA12 Ferrite Bearing: PTFE/graphite Measuring range: 0.1 - 2.5 l/min Measurement accuracy: +/- 3% of value Impulse tap: Hall generator p-max: 25 bar t-max: 100 °C Connections: G 1/4" El. Connection: pin plate with 3 flat connectors (2.8x0.5) and DIN plug, EN 60529 Bore: 5 mm Installation length: approx. 45 mm Installation position: Any K-factor: approx. 22000 pulses/litre Power supply: 5-24 VDC

with brass body and DIN connector.

with brass body and DIN connector.

167606 Turbine Measurement Vision V2000 (2008 4F22) 3 - 25 l/min in brass with DIN plug Vision 2008 4F22-DIN 47000-163-4F22 Vision 2008 4F22 turbine transmitter in brass Materials and technical data: Casing: Brass Rotor: PA12 /ferrite Bearing: PTFE/graphite Measuring range: 3 - 25 l/min Measurement accuracy: +/- 3% of value p-max: 25 bar t-max: 100 °C Connections: 3/8" G BSPP El. Connector: 3 pin (2.8 x 0.5) mini DIN connector, EN 60529 Installation length: approx. 55 mm Installation position: Any K-factor: approx. 920 pulses/litre Power supply: 5 - 24 VDC