Tahliye ve şarj istasyonu
Material no.: 285-000030A
Flammable performance
General Configuration:
Charging channels: 1024 for manual settings
Manual process: 1 channel
Number of models: 1024
Charging accuracy: ±0.25g <100g, ±0.25% >100g
Refrigerant type: R290
Included parts for installation:
- Inlet hose of 1 mtr incl. ø8 to ¼”NPT
- Air hose ø8 of 3 mtr incl.½” threat (male)
- Supply cable of 3 mtr. Excl. Plug
AGRAMKOW Mass-flow charging technology with DFC
(Dynamic Flow Compensation)
Vacuum circuit down to 0.02 mbar (abs) with active Pirani
sensor
Interfaces including hardware and application software for 2
potential free output (PASS and FAIL) and potential free
output (start welding) and 24VDC input (Welding done)
Declaration of conformity according to ATEX directive, Delta P
sensor for ventilation flow and gas sensors need to be ordered
with the safety supervision system
MPC2 (Multi-Purpose Controller) controller with alert
diagnostic monitor of flow, pressure and evacuation sensors,
refrigerant recovery, self-evacuation, 10/100Mbit Ethernet,
RS485, 2*USB1.1, CAN bus, RS232, IrDA communication
HMI (Human Machine Interface) TFT colour touch display for
process monitoring, receipt entering, I/O image, touch
control, process log, channels selection. Including light tower
with signal and warning lamps along with buzzer.
Language: Turkish
Charging adapter
FLEX 1 (ADC with Safe Block type)
Charging adapter for one Mass-Flow
with integrated start-stop switch, pressure sensor, valves,
high power adapter heat, thermostat, ADC (Automatic
DisConnection), Safe block (safety device to ensure that gas
is never charged unless the adapter is adapted correctly) and
hose management with quick connectors.
Valve 1 charging media: R290 at 20 g/sec
Hose length: 3,5 m
Coupling types: HK-2
Vacuum pump
L16m3/h
With Leybold 2-stage 16 m³ vacuum pump
Power supply: 3 x 400v ±5% + N + PE 50Hz