Şarj istasyonu
Material no.: 203-000040A
Flammable performance Charging channels: 1024 for manual or WEB settings Manual process: 1 channel Number of models: 1024 Charging accuracy: ±0.5g <100g, ±0.5% >100g Refrigerant type: R600a and R290 Refrigerant supply: Cylinder supply Gun mount: Left down (Left / Right is seen from the station)
Included parts for installation: - Inlet hose of 1 mtr incl. HK3 coupling (set) - Air hose ø12 of 3 mtr incl. ½” threat (male) - Supply cable of 3 mtr. Excl. Plug
AGRAMKOW PDC charging technology with DFC (Dynamic Flow Compensation) Vacuum circuit down to 0.02 mbar (abs) with active Pirani sensor
Interfaces including hardware and application software for 2 potential free output (PASS and FAIL) and potential free output (start welding) and 24VDC input (Welding done)
MPC (Multi-Purpose Controller) controller with alert diagnostic monitor of flow, pressure and evacuation sensors, refrigerant recovery, self-evacuation, 10/100Mbit Ethernet, RS485, 2*USB1.1, CAN bus, RS232, IrDA communication
HMI (Human Machine Interface) TFT colour touch display for process monitoring, receipt entering, I/O image, touch control, process log, channels selection, supporting WEB and browser-based receipt overview and maintenance monitoring. Language: English
Including interface for SAFE-EN
NOTE: If the cylinder (or connection point of the supply) has a build in check valve the supply hoses to the SARAMAX-F2 must be equipped with a 0.32 litre accumulator at min for flammable refrigerant and 0.32 litre at min for non-flammable refrigerant.
Guns Gun (ADC type incl safe block Gun for one PDC (max 20 g/sec) with integrated start-stop switch, pressure sensor, valves, gun heat, thermostat, ADC (Automatic DisConnection incl. safety device to ensure that gas is never charged unless the gun is adapted correctly) and hose management with quick connectors. Charging media: R600a at 20 g/sec Hose length: 3 m Coupling types: HK-2 (others on request)(Hose length, coupling type and charging speed must be specified by order)
Gun (ADC type incl. safeblock) Gun for one PDC with integrated start-stop switch, pressure sensor, valves, gun heat, thermostat, ADC (Automatic DisConnection incl. safety device to ensure that gas is never charged unless the gun is adapted correctly) and hose management with quick connectors. Charging media: R290 at 20 g/sec Hose length: 3 m Coupling types: HK-2 (others on request)(Hose length, coupling type and charging speed must be specified by order)
Vacuum pump L16m3/h With Leybold 2-stage 16 m³ vacuum pump 3 x 380-415V+N+PE, 50 Hz
Accessories Ventilation hose 2 off 1.3 meters ventilation hose ø100mm (connected to SARAMAX-F) incl. 4 special mounting clamps demanded for gas installation