Afriso ürünleri Türkiye satışı

DMU03VM 0-250 mbar G1/2B Measuring principle: piezoresistive stainless steel measuring cell Measuring range: 0/250 mbar (relative) Measurement accuracy: 0.5% FSO according to IEC 60770 Mediumber. Parts: 316L stainless steel (1.4404/1.4435)/FKM Connection: G 1/2 B acc. to DIN 3852-form E with advanced membrane Supply voltage: DC 8-32 V Output signal: 4-20 mA/2-wire electr. Connection: plug and cable socket to ISO 4400 (DIN 43650-A)

RF63gly 0/16bar 1/4 wheel D701 Dial: double scale bar outside black psi red inside

Additional probe f.Dif.fillst.f.tankControl10

0-8000 mbar 2xFESTO Measurement range (mbar): -100/+8,000 max. overpressure (bar): 10.5 Resolution (mbar): 0.1 (<199.9) or 1.0 (>200) Accuracy (% of measured value): 1.0 +/- 1 digit (<8,000 mbar) Box contents: - Measuring device with Festo connection and batteries - Calibration protocol - protective cover with magnet

Pressure transmitter for differential pressure measurement with on-site display. Display: 4-digit, red 7-segment display digit height 7 mm, -1999/+9999 Measuring principle: 2 piezoressistive stainless steel measuring cells Adjustment options: Turn-down 1:10 digital attenuation 0.3/30s Display housing can be rotated by 330° Supply voltage: DC 24V ± 10% Analog output: 4 - 20 mA/3-wire Switch output: 1 x open collector (PNP), max. 125 mA Switch-on and switch-off delay: 0 to 100 s, adjustable Operating temperature range: medium -40/+125°C Ambient -25/+85°C Storage -40/+85°C Housing: plastic (PA 6.6, polycarbonate) Electrical connection: plug M12 x 1, 5-pin Parts in contact with medium: 316L stainless steel, FKM Process connection: 2 x G ½B (DIN 3852) Can be rotated by 300° each Measuring range: 0/20 bar Maximum static pressure, single-sided: 1 x FS Accuracy:? ± 1% BFSL (IEC 60770) Protection class: IP 65 (EN 60529)

Rp ¾ x RP 1 - 3.0 bar For closed heating systems according to TRD 721 VdTÜV leaflet: Safety valve 100 and 100/4 sheet 1, DIN EN 12828. Suitable for water heating systems according to DIN 4751-2 with flow temperatures up to 120 °C and DIN 4751-3 with flow temperatures of up to 95 °C. Opening pressure: 3.0 bar (factory set) Case: brass Connection: valve inlet ¾, valve outlet 1

preassembled boiler safety group for closed heating systems according to DIN EN 12828 up to an output of 100 kW. Dashboard off solid cast brass. With polypropylene EPP insulation Boiler connection: G 1 IG Safety valve: 3 bar, inlet: G 3/4 outlet: G 1 Seal: PTFE sealing ring, rotatable Heating pressure gauge: 0-4 bar, diam. 63 G 1/4 radial Quick vent: G 3/8, 12 bar, with aquastop and mounting valve Temperature range: max. 120°C Dimensions: W x H x D 183 x 144 x 70 mm

for automatic ventilation of closed heating systems according to EN 12828. Made from MS precision machined parts. High-quality lid fibreglass-reinforced plastic. Screw ring made from Ms. With integrated AQUASTOP in the vent valve. Connection: 1/2" self-sealing Nominal pressure: 12 bar Temperature range: max. 110°C Packing unit: 25 pieces in a box

for automatic ventilation of closed heating systems according to EN 12828. Made from MS precision machined parts. High-quality lid fibreglass-reinforced plastic. Screw ring made of Ms. With 1/2" Assembly valve, with integrated AQUASTOP in the vent valve. Connection: 3/8” self-sealing Mounting valve: 1/2" Nominal pressure: 12 bar Temperature range: max. 110°C Packing unit: 25 pieces in a box

Float-based mechanical low water safety device with DN 20 welding socket with lock. For closed heating systems with flow temperatures of up to 120°C to protect the boiler combustion by reporting a lack of water. Mandatory from 300 kW in accordance with EN 12828. General installation recommended for all systems, especially for attic heating systems. A lock prevents you from switching on again by yourself. For use in continuous operation. Die-cast brass probe body with DN20 welding socket, float mechanism, electrical switch, test and release button.VDTÜV-tested as a water level limiter for max. operating pressure 10 bar and max. operating temperature 120°C component number TÜV.HWB. 07-232.

Probe body: brass cast Float: plastic Installation height: 358 mm Welding socket: DN 20 Max. operating temperature: 120°C Max. operating pressure: 10 bar Test pressure: 15 bar Electr. connection: AC 250 V, 10 A Protection class: IP 44 Approval: TÜV-HWB 02-232 WMS-WP 6-0, V-MS - Like WMS-WP 6 but without locking mechanism. For use in systems where a remote control panel reset facility is provided. WMS-WP 6-R2 - With external connection thread R2" for direct mounting to the boiler

with turning scale 0 - 150/250 cm

Application: for galvanic separation and amplification of DC signals (mA) Housing: standard rail housing W x H x D: 18 x 78 x 103 mm Supply voltage: AC/DC 20-253 V Input: 0-20 mA or 4-20 mA 1:1 to the input signal Output load: max. 800 ohms

according to ATEX, WHG/VaWS and BetrSichV Class II leak detector (EN13160-1) with an intrinsically safe probe circuit for double-walled containers containing liquid in the monitoring room. For monitoring when storing flammable (also < 55°C) and non-flammable liquids hazardous to water above ground. Approved for tanks according to EN 12285-1, EN 12285-2, DIN 6618-1, DIN 6619-1, DIN 6623-1, DIN 6624-1. Signal unit with operating and alarm displays, acoustic alarm transmitter, test button and increased noise protection. With relay to connect additional warning devices (1 x changeover device). Package includes: Signal part, leak detector fluid container and probe Building regulations proof of usability CE mark and UEHP EC type examination certificate: TPS 03 ATEX 15639 6 Ex II (1) G (Ex ia) IIC or (Ex ia) IIB

in protective housing (IP55), without heating with horn *With visual/audible alarm, acknowledgement button and switch output *High energy efficiency: Economical, powerful DC motor with high starting point *Service indicator for annual maintenance * Includes protective housing (IP55) specifications ⦁ Ambient temperature range: -5/+50 °C ⦁ Supply voltage AC 100-240 V ⦁ Nominal output < 10 VA ⦁ Relay contact switching output: 1 potential-free changeover ⦁ Contact load max. 250 V, 2 A, resistive load ⦁ Operating pressure monitoring room: approx. -90 mbar ⦁ Alarm switch on: -40 ± 5 mbar ⦁ Housing: Wall-mounted housing made of impact-resistant plastic (ABS), W x H x D: 202 x 230 x 70mm ⦁ Protection class IP 30 (EN 60529)

Case diameter: 80 mm Connection: NPT 1/2" radially downwards Display range: 0/250 psi Dial: single scale psi Housing: 304 stainless steel with 304 crimp ring Parts in contact with the medium: 316 Ti/316 L stainless steel Lens: plastic Accuracy class: 1.6

Case diameter: 100 mm Connection: G ½ B axially eccentric Display range: 0/1000 kPa Housing: 304 stainless steel (1.4301) with bayonet ring 304 (1.4301) Parts in contact with the medium: 316ss stainless steel (1.4571/1.4404) Lens: laminated safety glass Accuracy class: 1.0 Options: see display area