Valco ürünleri Türkiye satışı

Contacts No. 1 Type B45 float - Spansil material Brass rod 1" Gas-M connection - brass material NBR gasket material Max working pressure 20 bar Max working temperature 105 °C Total length L0 = 250 mm. Intervention rates in mm and contact situation in the absence of a level: L1 = 215 = Contact type = NC Max electrical load: Contact type 3 = 300VAC/70VA/0.5A - 350Vcc/50W/0.7A Electrical output: Connector type S1 - DIN-43650-A - PG9 Degree of protection IP65 nos. cod. 00.0002.2843

vertical mounting - bottom flow upwards Brass body 1/2" Gas-M process connections Piston sensing element Max working pressure 250 bar Max working temperature 90°C Fixed calibration, see available calibrations as per the technical bulletin Recommended maximum flow 25 l/min H2O Head loss at maximum recommended flow 0.5 bar Replaceable and interchangeable electric head - without removing the flow switch from the pipeline Contact reed NA Maximum electrical loads: 300VAC-DC/70VA/50W/0.5A Electrical output: 6.3 mm Faston Replaceable and interchangeable electric head - without removing the flow switch IP00 degree of protection ns. cod. 00.0001.0146.3

MCP-4J

Visual flow indicator - bidirectional operation Latene body (ppH homopolymer) 1" Gas-F connections - material: brass Visor tube in high-strength borosilicate glass Polypropylene propeller - red color Maximum working pressure 12 bar Maximum working temperature 100°C Minimum rotor start flow and maximum recommended flow rate as per technical bulletin Optional mounting position

low water cut off type 00.0008.0111.3 (SLC 010)

Measuring range: 0.3 - 9 l/min No. 8000 imp. /l Documentation provided: - Internal test certificate - Valco catalog bulletin

AISI-316 body 1" Gas-M conical process connection UNI 7/1 - DIN 2999 Suitable for mounting intubations DN25... DN200 Stainless steel pallet AISI-316 bellow sealing element Max working pressure 10 bar static/30 bar dynamic Max working temperature 120°C Adjustable calibration range depending on the DN of the pipeline and the Size of the pallet used See technical sheet Pressure loss at maximum recommended flow rate 0.08 bar ABS electrical case PG 13.5 cable entry SPDT microswitch Maximum electrical loads: 250Vca/15A Degree of protection IP65 Ns. cod. 08.0001.0270

horizontal or vertical mounting with flow From bottom to top Brass body 1/2" Gas-M process connections Piston sensitive element Max working pressure 250 bar Max working temperature 90°C Fixed calibration, see available calibrations as per the technical bulletin Maximum recommended flow rate 25 l/min H2O Pressure loss at maximum recommended flow rate 0.5 bar Replaceable and interchangeable electric head - without removing the flow switch From the pipeline Contact reed NA Maximum electrical loads: 300VAC-DC/ 70VA/50W/0.5A Electrical output: Faston 6.3 mm Replaceable and interchangeable electric head - without removing the flow switch Degree of protection IP00 J= special processing on process connection 000001.0873

N. 4 adjustable alarms Article code 00.0007.00087.1 LCD display with back light. • Programmable measuring units and range. • Input signals: (0)4  20mA , 0  5V, 0  10V, 500  20K, 0,1  10000Hz • Output signals: (0)4  20mA , 0  5V, 0  10V • Up to 6 alarm thresholds with adjustable differential. • LED alarm.

Conductive level sensor with integrated management electronics Minimum or highest level function Brass body 3/8" Gas-M process connection N.1 Electrode - Length 100 mm. AISI 316 electrode with Polyolefin coating Max working pressure 6 bar Power supply 24/230 Vac Relay output - SPDT contact Max electric load 230 Vac/6 A Adjustable sensitivity 10-60 µS - Standard setting set 20 µS Working environment temperature -20/+50 °C ABS case - PG7 cable inputs Degree of protection IP65

900 Series - solenoid-operated glue valve

Visual flow indicator - bidirectional operation Mod. CV-025G.PSO.R Latene body (PPh homopolymer) 1" Gas-F connections - material: brass High-strength borosilicate glass visor tube Polypropylene propeller rotor - red color Maximum working pressure 12 bar Maximum working temperature 100°C Minimum rotor start rate and maximum recommended flow rate as per technical bulletin Optional mounting position nos. cod. 00.0006.0061.1

Repair Kit 707XX443 INCLUDES: (1 pc) 783xx043 Spring washer (1 pc) 745xx184 O-ring (2 pcs) 784xx136 Screw (1 pc) 783xx042 Spring, 900 (1 pc) 746xx069 O-ring (1 pc) 745xx007 O-ring (4 pcs) 784xx112 Screw (1 pc) 750xx005 Swivel disconnect

Brass body 1/2" Gas-M process connections Piston sensitive element Max working pressure 250 bar Max working temperature 90°C Fixed calibration, see available calibrations as per the technical bulletin Maximum recommended flow 25 l/min H2O Pressure loss at the maximum recommended flow rate 0.5 bar Replaceable and replaceable electric head - without removing the flow switch from the pipeline Contact Reed NA Maximum electrical loads: 300VCA-DC/70VA/50W/0.5A Electrical output: Faston 6.3 km Replaceable and replaceable electric head - without removing the flow switch Degree of protection IP00 nos. cod. 00.0001.0673