Steimel ürünleri Türkiye satışı

A-TM6-80GK-GKM pump unit 18.5 kW, 750, 400/690 V, 50 Hz, IP55, ISO F Gear pump unit: TM 6-80 GK-GKM with heating jacket item no.: ATM6-80GK-162624R Dimension sheet: DPA006M-162624R Spare parts list: DET006M-162624R Suction and pressure connection: DN 40 Housing parts: EN-GJL-250 (GG25) Suction valve: yes Thrust washers: bronze shafts reinforced: 16 Mn Cr S 5, case hardened gears: 16 Mn Cr S 5, case-hardened Shaft seal: mechanical seal M 2/35+V+R elastomers: FPM Storage: multi-layer M-liner and drive-side spherical roller bearing Grease filled bearings: universal grease Heating jacket connections: DN 15, PN 16 Pumping medium: liquid vegetable fat Viscosity: Ang. 50-150 cSt. Temperature: 40 - 80°C Flow rate: approx. 80 - 85 l/min pressure: 25 bar : Form pressure: 1-5 bar Speed: 725 rpm Rotation direction: right Test run: yes Pre-cleaning: rinse with white spirit , then clean Coupling: BKUP140-3260-001 Clutch protection: BKS918225240BA80 Base plate: EGP913120-46BB01 Backing: EUL—085105BG01 with three-phase motor: LDM225-08-005 Power: 18.5 kW Speed: 725 rpm Voltage: 400/690 volts frequency: 50 Hz Degree of protection: IP 55 Insulation class: F Motor protection: 3 PTC thermistors Design: B 3 Painting: RAL 1013 Silicone-free pump! The pump was tested with mineral oil and must be flushed before commissioning! Information plate: EAY924-PL02 Type plate: ETY924-D-E—PE02

Gear pump: SF 4/80 RD Product no.: BZP054080RD—151R Dimension sheet: DMB054D-01 Spare parts list: DET054080RD-150R Suction and pressure connection: SAE 2 (50) Material design: Housing parts: EN GJL 250 (GG-25) Waves: 16MnCrS5 Gears: GGG-40, ionitrated helically toothed Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Flow rate: approx. 129 l/min. pressure: 5 bar Rotational speed: 1750 rpm Viscosity: 50-5000 cSt pressure relief valve Setting range: 2-16 bar Opening pressure: 8 bar Rotation direction: right Paint: primed HDO058 Type plate: ETY924-D-E-PE01 with free shaft end Test run: yes, with ISO VG 46

PN25 1460tr/min Nominal pressure: PIN25 Housing material: EN-GJL-250 Rotation speed: 1460rpm Oil delivery rate, approx, 50 rpm Starting viscosity < 5000 mm?/s Operating pressure < 8 bar Direction of rotation: clockwise with pressure limiting valve set to p > 8 BARS Direct coupling with three-phase motor B5 motor Size: 100L-04 Rotation speed: 1420 rpm Power 3KW Voltage: 3x400V Frequency: 50Hz Insulation class: F Type of protection: IP 55 Serial No. 1.PU19 1668-2 Cust. share No.: 000.001.153.091 Pos 4K1 / S/Pos KDO1 / Item 22 for Tep 10-13 pump unit Project A1525-Couvrot-Modernization project

SF3/50RD-O, gear pump FKM, 2-18 bar, noise-optimized Gear pump: SF 3/50 RD-O Item no.: BZP053050RD—165R Dimension sheet: DMB053D-02R Spare parts list: DET053050RD-165R Suction and pressure connection: SAE 1 ½ (40) Housing parts: EN-GJL-250 (GG-25) Pinion shafts, noise-optimized: 16MnCrS5, egh. , helically toothed, flank ground Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: approx. 75 l/min. pressure: 5 bar Speed: 1450 rpm Pressure relief valve: opening pressure 8 bar (setting range 2 - 18 bar) Rotation direction: right Test run: yes, with HLPD 46 Paint: primed (HDO058, green) with free shaft end. Type plate: ETY924-D/E—PE01

Gear pump: TFL 10-180 KR Pump flange 250/180/215: EPF010FL-250BG01 Item no.: PTFL10-18-992305 Dimension sheet: DMB00XFL-01 Spare parts list: DET010FL-992305 Suction and pressure connections: DN 125, PN 16, DIN 2633 Material design: Housing parts: GG-25 Flange cover: GGG-40 special coating (PDD) Counter cover: GG-25 special coating (PDD) Shafts: 16 Mn Cr S 5 case hardened Gears: GGG -40, ionitrided, helically toothed Bearing bushings: multi-layer MD Additional support bearings: spherical roller bearings Shaft seal: radial shaft seal elastomers: FPM Suction valves: yes Pumping medium: lubricating oil ISO VG 32 Temperature min/normal/max: 20/50/74° C. Viscosity min-max.: 10-85 cSt. Test run: with ISO VG 46 Flow data Q: 1220 l/min. P: 6 bars n: 1800 rpm Noise level: 95 dBA Direction of rotation: l i n k s Paint: primer HCP011

TM6-80 GK Z pump GD, FKM, EC-Egh, ML, M2/35+V+R, spherical roller bearing Gear pump unit: TM 6-80 GK-GKM with heating jacket item no.: PTM6-80GK-162624R Dimension sheet: DPP006M-162624R Spare parts list: DET006M-162624R Suction and pressure connection: DN 40 Housing parts: EN-GJL-250 (GG25) Suction valve: yes Thrust washers: bronze shafts reinforced: 16 Mn Cr S 5, case hardened gears: 16 Mn Cr S 5, case-hardened Shaft seal: mechanical seal M 2/35+V+R elastomers: FPM Storage: multi-layer M-liner and drive-side spherical roller bearing Grease filled bearings: universal grease Heating jacket connections: DN 15, PN 16 Pumping medium: liquid vegetable fat Viscosity: Ang. 50-150 cSt. Temperature: 40 - 80°C Flow rate: approx. 80 - 85 l/min pressure: 25 bar : Form pressure: 1-5 bar Speed: 725 rpm Rotation direction: right Test run: yes Pre-cleaning: rinse with white spirit, then clean Painting: RAL 1013 Silicone-free pump! The pump was tested with mineral oil and must be flushed before commissioning! Information plate: EAY924-PL02 Type plate: ETY924-D-E—PE01

SF3/32RD, gear pump FKM, 2-18 bar, anti-clockwise Gear pump: SF 3/32 RD Product no.: BZP053032RD—151L Dimension sheet: DMB053D-02 Spare parts list: DET053032RD-150L Suction and pressure connection: SAE 1 ½ (40) Housing parts: EN-GJL-250 (GG-25) Pinion shafts: 16MnCrS5, hardened helically toothed, flanked Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Viscosity: 50-5000 cSt Flow rate: 52 l/min. pressure: 5 bar Speed: 1450 rpm Pressure relief valve: opening pressure 8 bar Rotation direction: left test run. yes Type plate: ETY924-D/E—PE01 Paint: primed (HDO058, green)

Gear pump unit: SF 3/32 RD - VLFM Item no.: ASF3-32RD-162586R Dimension sheet: DPA053D-100LFM-R31 Spare parts list: DET053032RD-165R Suction and pressure connection: SAE 1 1/2 Housing parts: EN-GJL-250 (GG-25) Pinion shafts, noise opti.: 16MnCrS5, egh., oblique galv. Shaft seal: radial shaft seal elastomers: FKM Speed: 950/1140 rpm. pressure relief valve Opening pressure: 8 bar Setting range: 2-18 bar Rotation direction: right Test run: yes, with HLPD 46 Bellhousing: BLF053250128LA21 Coupling: BKUA055-1928-301 three-phase motor: LDM100-06-032 (Birkenbeul) Engine data: Power 1/2:1.5 /1.7 kW Speed 1/2:1000/1200 rpm. Voltage/ frequency 1:230/400 volts at 50 Hz Voltage/ frequency 2:265/460 volts at 60 Hz Efficiency class: IE3 with additional plate without IE3 and CE marking for Installation height: 3500 m above sea level Voltage/frequency: 220-240/380-420 V at 50/60 Hz reduced power: 1.23 kW 250-280/440-480 V at 60 Hz reduced power: 1.4 kW Degree of protection: IP 55 Insulation class: F Design: B 5 Aggregate paint: without Type plate: ETY924-D-E—PE02 Storage: multi-layer MD Pumping medium: lubricating oil Viscosity: 50-5000 cSt Flow rate: approx. 32.7/39.3 l/min. pressure: 5 bar

SF6/180RD, gear pump FKM, 2-16 bar Gear pump: SF 6/180 RD Product no.: BZP056180RD-151L Dimension sheet: DMB056D-01 Spare parts list: DET056180RD-150 Suction and pressure connection: SAE 2 ½ materials: Housing parts: GG 25 Shafts: 16 Mn Cr S 5 Gears: GGG-40, ionitrated helically toothed Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Flow data Q: 135 l/min. p: 5 bars n: 1160 rpm Viscosity: 50-5000 cSt Pressure relief valve: opening pressure 10 bar Rotation direction: left with free shaft end Paint: primed HCP011 green Type plate: ETY924-D/E—PE01

P-SF2/20RD-VL, gear pump, 2-20 bar FKM, suitable for motor IEC 90, B3/B5, with mounting screws Gear pump: SF 2/20RD - VL Item no.: PSF2-20RD-131027R Dimension sheet: DPA052D-090LMF-R33 Spare parts list: DET052020RD-150R Suction and pressure connection: G 1/SAE Material design: Housing parts: GG-25 Pinion shafts: case hardened steel 16MnCrS5 helically toothed, flanked Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Viscosity: 50-5000 cSt Delivery data: approx. 27 l/min pressure: 10 bar Rotational speed: 1450 rpm pressure relief valve Setting range: 2 - 20 bar Opening pressure: 12 bar Rotation direction: right with coupling: BKUA040-1424-301 with bellhousing: BLA052200110LA21 suitable for three-phase motor Design/size: B3/B5/IEC 90 Paint: primed (HDO058, green) Type plate: ETY924-D-E—PE01

SF6/180RD-O, gear pump FKM, 2-16 bar, noise-optimized Gear pump: SF 6/180 RD - O Item no.: BZP056180RD-165R Dimension sheet: DMB056D-01 Spare parts list: DET056180RD-165R Suction and pressure connection: SAE 2 ½ Housing parts: EN-GJL-250 (GG25) Shafts: 16 Mn Cr S 5, egh. Gears, noise opti.: EN-GJS-400-15 (GGG-40), ionitrated, helically toothed Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: 250 l/min. pressure: 5 bar Rotational speed: 1450 rpm Pressure relief valve: opening pressure 8 bar Setting range: 2-16 bar Rotation direction: right Test run: yes, with HLPD 46 Paint: primed (HDO058, green) with free shaft end. Type plate: ETY924-D/E—PE01

A-SF4/112RD-VLFM, pump unit,2-16 bar 3.0 kW, 1500, 230/400 V, 50 Hz, IE3, IP55, F to B, B5 Gear pump unit: SF 4/112 RD - VLFM Item no.: ASF4-112RD210089R Dimensional drawing: DPA054D-100LFM-R32 Spare parts list: DET054112RD-150R Suction and pressure connection: SAE 2 Housing parts: EN-GJL-250 (GG-25) Shafts: 16 Mn Cr S 5, egh. Gear wheels: EN-GJS-400-15 (GGG-40), ionitrated, helical Storage: multi-layer MD Shaft seal: radial shaft seal elastomers: FKM Pumping medium: lubricating oil Viscosity: 50-300 cSt. Temperature: 10-60°C Flow rate: 146 l/min. pressure: 3 bar Rotational speed: 1460 rpm pressure relief valve Opening pressure: 5 bar Rotation direction: right Test run: yes, with HLPD 46 Coupling: BKUA065-2428-301 Bellhousing with foot: BLF054250135LA21 Three-phase motor: LDM100-04-904 Engine data: Power: 3.0 kW Speed: 1500 rpm Voltage: 230/400 volts at 50 Hz Efficiency class: IE3 Degree of protection: IP 55 Insulation class: F Design: B 5 Paint: primed HDO058 Type plate: ETY924-D/E—PE02

Antr. -shaft with gear TF 10-180 EC-EGH, HA ion, oblique

countershaft with gear wheel T10-180 A4 EC-EGH, HA ion, oblique

45 x 70 x 42mm

1008230

Gear pump: TFL 10-120 KR Product no.: PTFL10-12-... Dimension sheet: DMB00... Spare parts list: DET010FL... Suction and pressure connection: DN 100, PN 16, DIN 2633 Material finish: Housing parts: GG-25 Flange cover: GGG-40 Counter cover: GG-25 waves: 16 Mn Cr S 5, case-hardened gears: GGG 40, helical Bushings: multi-layer MD Support bearing: spherical roller bearing Shaft seal: radial shaft seal Elastomers: FKM Extraction valve: yes Pumped medium: lubricating oil Temperature min/normal/max: 50°C Viscosity: 50-1000 cSt Test run: with ISO VG 46 Delivery data Q: 620 l/min. P: 5 bar n: 1500 rpm Direction of rotation: right Paint: primer HCP021