Steimel ürünleri Türkiye satışı

000350390 BV 3-55 RR Gear pump: BV 3-55 RR, vacuum-tight Item number: BZP043-55- (023755) Sectioning: DSZ04X Dimension sheet: DMB043D-BV-F01 Suction and pressure connection: DN 40, PN 40, with O-ring grooves Materials: Housing parts: EN GJL 250 (GG-25) Drive and Counter Pinion: 16mnCRS5, flank ground straight teeth Storage: Bronze AW Shaft seal: radial shaft seal (double) Elastomers: FKM (Viton) with quench teat: BQB—IGM010-01 Pumped medium: lubricating oil Viscosity: approx. 150 cSt. Flow rate: approx. 52 l/min Pressure: 5 bar Speed: 900 rpm Direction of rotation: right Paint: primer HDO058 - green Problem: yes Identification plate: ETY924-D-E—PE01 with free end of the wave

090-04 three-phase motor, IE3B51,1 kW, 1500, 230/400V, 50Hz, IP55, Iso.F IE3 type plate stamp: - 230/400 volts 50 Hz - 265/460 volts 60 Hz

SF2/20RD-O FKM, 2-20 bar, noise-optimised Gear pump: SF 2/20 RD Product no.: BZP052020RD—165R Dimension sheet: DMB052D-04R Spare parts list: DET052020RD—165R Suction and pressure connection: G 1/SAE 1 Housing Parts: EN-GJL-250 (GG-25) Sprocket Shafts, Noiseptic: 16mnCrS5, Egh., helical gear Storage: Multilayer Shaft sealing: radial shaft seal Elastomers: FKM Pumped medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: 28.5/34.5 l/min. Pressure: 5 bar Speed: 1450/1750 RPM Pressure Relief Valve Adjustment range: 2-20 bar Opening pressure: 8 bar Direction of rotation: right Aggregation coat: primed HDO058 green Identification plate: ETY924-D-E—PE01

SF3/50RD-O FKM, 2-18 bar, noise-optimized Gear pump: SF 3/50 RD-O Product no.: BZP053050RD—165R Dimension sheet: DMB053D-02R Spare part list: DET053050RD-165R Suction and pressure connection: SAE 1 ½ (40) Case parts: EN-GJL-250 (GG-25) Sprocket shafts, noise-optimized: 16MnCrS5, egh. , helical-toothed, flank-ground Storage: multi-layer MD Shaft seal: radial shaft seal Elastomers: FKM Conveying medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: approx. 70.8 l/min. Pressure: 5 bar Speed: 1450 rpm Pressure relief valve: 8 bar opening pressure (adjustment range 2 - 18 bar) Rotation direction: right Test run: yes, with HLPD 46 Paint: primed (HDO058, green) with a free wave end. Type plate: ETY924-D-E—PE01

Perforated plate ring 2mm lo. in St37-2

Leistung : 1,1 kW Drehzahl : 670 1/min Spannung : 230/400 Volt Frequenz : 50 Hz Schutzart: IP 55 Bauform : IM B5 A=250mm Wärmeklasse "F"

BZP052013R---150R SF2/13R, gear pump FKM, G 1/SAE 1

BZP052008R---150R SF2/8R, gear pump FKM, G3/4

ASF2-13RD-162652R A-SF2/13RD-VLFM, pump unit, 2-20 bar 1.1 kW, 1500, 230/400V, 50Hz, IP55, F, B5, IE3 Product no.: ASF2-13RD-162652R Dimension sheet: DPA052D-090LFM-R33 Spare parts list: DET052013RD—165R Suction and pressure connection: G 1/SAE 1 Housing Parts: EN-GJL-250 (GG-25) Sprocket shafts, noise.: 16mnCRS5, Egh., inclined. Storage: Multilayer MD Shaft sealing: radial shaft seal Elastomers: FKM Pumped medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: approx. 18.5 /22 l/min. Pressure: 5 bar Speed: 1450/1740 RPM Pressure Relief Valve Opening pressure: 8 bar Adjustment range: 2-20 bar Direction of rotation: right Trial: yes, with HLPD 46 Clutch: BKUA040-1424-301 Pump carrier with foot: BLF052200110LA21 3-phase motor: LDM090-04-903 (birch dump) Engine data: Power 1/2:1,1/1,2 kW Speed 1/2:1500/1800 rpm Voltage/frequency 1:230/400 volts at 50 Hz Voltage/frequency 2:265/460 volts at 60 Hz Efficiency class: IE3 Additional plate (without IE3) for Voltage/Frequency: 220-240/380-420 V @50/60 Hz 250-280/440-480 V @60 Hz Degree of protection: IP 55 Insulation class: F Design: B 5 Aggregate coating: primed Identification plate: ETY924-D-E—PE02

AFM 30

BZP053032RD--165R Order number: BZP053032RD--165R FKM, 2-18 bar, noise-optimized Suction and pressure connection: SAE 1 1/2 Material design: Case parts: EN-GJL-250 (GG-25) Sprocket shafts, noiseless: 16MnCrS5, egh., helically toothed Shaft seal: radial shaft seal Elastomers: FKM Storage: multi-layer MD Pumping medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: approx. 50 ltr/min Pressure: 5 bar Speed: 1450 rpm pressure relief valve Adjustment range: 2-18 bar Opening pressure: 8 bar Direction of rotation: right Test run: yes, with HLPD 46 Coating: primed Identification plate: ETY924-D/E--PE01

BZP053050RD—165R Product no.: BZP053050RD—165R Dimension sheet: DMB053D-02R Spare parts list: DET053050RD—165R Suction and pressure connection: SAE 1 ½ (40) Housing Parts: EN-GJL-250 (GG-25) Noise-optimised pinion shafts: 16mnCRS5, EGH. , helical toothed, flank ground Storage: Multilayer MD Shaft sealing: radial shaft seal Elastomers: FKM Pumped medium: lubricating oil Viscosity: 50-5000 cSt Temperature: 10-60°C Flow rate: approx. 70.8 l/min. Pressure: 5 bar Speed: 1450 RPM Pressure relief valve: 8 bar opening pressure (adjustment range 2 - 18 bar) Direction of rotation: right Trial: yes, with HLPD 46 Paint: primed (HDO058, green) with free end of the wave. Identification plate: ETY924-D-E—PE01

GS 1529 Vulkollan VN18, 85 Degree Shore, N.Zg. 1SKZ8048

Support Ring, Rod Seal, O-Ring

70 degree shore 28x2 mm Perbunan

SF4 to Viton Packed as a set! Consisting of: 1,00 pcs IDP050X2V O-ring 70/80 degrees shore 50x2 mm Viton 1,00 pcs IDP100X2,5V O-ring 70/80 degrees shore 100x2,5 mm Viton 1,00 pcs IDI025X047X06V Radial shaft seal BABSL 25x47x6mm Mat. 75 FKM 595 Original Freudenberg