Südmo ürünleri Türkiye satışı

Type: K402 Series: BV Perform Nominal size: ISO 065 Case design: 2x welding ends Ø 76.10 x 2.00 Mode of operation: without drive unit Maximum operating pressure: 145 psi (10 bar) Materials in contact with the product: Seal: EPDM (FDA/EG1935) Material: 1.4404 (AISI 316L) Surface: Ra <= 0.8μm Optional test certificates: APZ DIN EN 10204 - 3.1 for the raw material of flanges

Reaction pressure 1,5bar

compliant Pressure Equipment Directive Cat. IV Type: T32504 Nominal size: DN 040 Inlet: DIN 11853-BS 41x1.5-1.4404-H2 collar Groove union nut DIN11851-F40-1.4301 Outlet: DIN11853-GS 53x1.5-1.4404-H2 thread connector Media: vapors, gases and liquids Adjustment range: 0.5-5.0BAR (7.3-73PSI) Set pressure: X.XBAR (XXPSI) can be adjusted downwards Ventilation: manual Seals: EPDM (FDA/EG1935) Materials in contact with the product: 1.4404 (AISI 316L) Surfaces: Inlet (pressure side): Ra <= 0.8 μm Outflow: Ra <= 1.6 μm (excluding weld seam to flange inlet/outlet) with sealing

Functions: both valve plates can be synchronised Nominal size: OD 2.00" Working method: air-opening-spring-closing max. allowed. Working pressure: 10 bar (145 psi) Housing: 4x welding ends A-B Ø 50.80x1.65 C-E Ø 50.80x1.65 (T-piece) connection for PT100 temperature sensor Leakage chamber Type: 2x A385-D SVP-Select Nominal size: OD 0.75" Inlet: air-opening-spring-closing 1x welding end Ø 19.05x1.65 Outlet: spring-opening-air-closing 1x welding end Ø 19.05x1.65 Materials in contact with the product: Seal: P³ cuff/EPDM Approvals: FDA Material: AISI 316L (UNS S31603) Acceptance test certificate 3.1 in accordance with DIN EN 10204 surface : Inside Ra <= 0.8μm : Outside Ra <= 1.6μm (excluding weld seam in the flushing case/to the T-piece)

Operating instructions as a PDF

Type: K662 Series: BV Perform Nominal size: OD 1.50" Case design: 2x welding end Ø 38.10 x 1.65 Working method: air-opening-spring-closing (NC) Maximum operating pressure: 10 bar (145 psi) Materials in contact with the product: Seal: EPDM (FDA/EG1935) Material: 1.4307 (AISI 304L) Surface: Ra <= 0.8μm ATEX: II 2 G Ex h IIB 80 °C... 150 °C Gb II 2 D Ex h IIIC T150°C Db

Type: K667 Mounted with Mounting kit: 2 x M12 sensors Customs Tariff No: 84818085 Net weight: 30,396 kg

Complete Functions: leak-free switching : Tactable valve disc Nominal size: OD 2.50" Working method: air-opening-spring-closing max. allowed. Working pressure: 10 bar (145 psi) version Housing: 2x welding ends : A Ø 63.50x1.65 : D Ø 63.50x1.65 Materials in contact with the product: Seal: EPDM Approvals: FDA ATEX: II 2 G Ex h IIB 80°C... 150°C Gb II 2 D Ex h IIIC T150°C Db Material: AISI 316L (UNS S31603) surface : Inside Ra <= 0.8μm : Outside Ra <= 1.6μm

SVP Select Tipo: A385-D-PEEK Design: cuff/PEEK plate Nominal size: DN 025 Working method: air-opening-spring-closing Max. allowed. Operating pressure: 6 bar (87 psi) housings Outlet: 90° welding end Ø 29.00x1.50 : suitable for M90 block flange Materials in contact with the product Seal: P³ cuff/PEEK Approvals: FDA ATEX: II 2 G Ex h IIB 80°C... 150°C Gb II 2 D Ex h IIIC T150°C Db Material: 1.4404 (AISI 316L) Surface: Ra <= 0.8μm

size 1 for flapper valve Mounted with Mounting kit: IntelliTop 2.0 2501601SP Pneumatic rotary actuator for flap valves Series: BV Perform Mounting kit: without Nominal size: DN 020 - DN 040/OD 0.75" - OD 1.50" Intermediate clamp version: DN 025 - DN 040/OD 1.00" - OD 1.50" Model size: S1 Mode of operation: NC/ NO (reversible spring tension) Control air pressure: 6 - 8 bar/87 - 116 psi Material: 1.4301 (AISI 304) Surface: brushed 2191806 IntelliTop 2.0 mounting kit suitable for: Flapper valves, ball valves and leakage damper valves PERFORM rotary drive: S1 (NC/ NO/AA) + S2 (AA) Material: 1.4021/1.4404/1.4305 Seal: EPDM/NBR Surface: twisted/brushed

Series: BV Perform Nominal size: OD 2.50" Housing design: intermediate clamp small flange Ø 63.50 x 1.65 Working method: air-opening-spring-closing (NC) Maximum operating pressure: 10 bar (145 psi) Materials in contact with the product: Seal: EPDM (FDA/EG1935) Material: 1.4404 (AISI 316L) Surface: Ra <= 0.8μm ATEX: II 2 G Ex h IIB 80 °C... 150 °C Gb II 2 D Ex h IIIC T150°C Db Optional test certificates: APZ DIN EN 10204 - 3.1 for the raw material from flanges

DSV Complete double seat valve Type: D631NSP - 634NSP Nominal size: DN 65/2.5" Seal: EPDM-FDA