Planetroll ürünleri Türkiye satışı

Planetroll Servo Gearbox Model: PD065-HAJ007 Ratio: 7:1 Motor Shaft: H - Ø14mm Flange: AJ - Bolt Circle: 70mm, Pilot Diam: 50mm Output Shaft Dia: 14mm Grease Lubrication

N ° serie 0604077 1200 output turns - 1300 input turns

consisting of: a) Variable gearbox “p l a r o m a s t e r” (short) specifications Control: right Design: B14 Installation position: 2 (similar to V6) Speed range: 0 to approx. 1200 rpm (50 Hz network) Output torques: approx. 3 Nm from 50 to 470 rpm approx. 1.3 Nm at 1200 rpm (P1 = 0.25 kW; n1 = 2800 rpm) Drive components 1 piece Variable gearbox plaromaster type MA3 - preload A, galv. output ring Z=60 (housing short) for EFB drive side: free input shaft Ø14H6x30, drive connection compatible to the previous A/AR3 series output side: B14-120, output shaft Ø14H6x30 1 piece 302-06944 Controls type: SKA, push-in connection 1 piece 206-00236 Signal switch type SG10 with connector V1 - three-wire - (supply voltage DC 10-30 V; Y183936).

AC, 0.75D4(Ex)MR5-2

consisting of: a) three-phase motor b) control gear “p l a r o m a s t e r” Control element: right Design: B5 (engine terminal box left) Installation position: 4 (V1) Speed range: 0 to approx. 500 rpm ** Output torques: approx. 7 Nm from 10 to 320 rpm approx. 5.2 Nm at 500 rpm ATEX design: Ex II 2 G Ex h IIB T4 Gb (drive unit) 1 202-00477 Internal mechanical speed limitation 501-01752 drive-side: 3-phase motor 0.37 kW, 1390 rpm, 230/400 V +/- 5%, 50 Hz, 1.7/0.98 A, IP 55, isol.class F, “Increased safety” Exii2g Exe IIC T4 Gb+ with IBEXU02ATEX1112-09; aluminum terminal box, 1x M20x1.5 cable entry; size 80, connection size 71, B14/V18-105 with protective roof 302-07451 PLAROMASTER control gear unit type MR3 - silicone-free drive-side: for motor mounting, size 71, B14-105 (with lantern and coupling) output side: B5 flange dia.160 with leakage control, output shaft Ø19H6 x 40 302-01466 Control element type HVK 5 for AR2-AR5/MR3+MR5: Handwheel (d0=50) with fine adjustment scale; coarse scale 0 - 12, fine scale 0 - 100 602-08882 + paint RAL 9010 -pure white-

Order code: PD085-enb025-1aa1 Reduction: i = 25 Twist play:

consisting of: a) three-phase motor according to IE2 b) Planetary gearboxes “p l a n e t d r i v e” Technical data: Design: B14 Speed: 50/60 rpm (50/60 Hz network) Output torque: max. permissible: 95 Nm Drive components: 1 501-16212 1 PCS drive side: special three-phase motor 0.74 kW, 1500 rpm; 220-240/380 - 420 V, 50 Hz, 220-277/380 - 480 V, 60 Hz, isolated class F, IP54; energy efficiency class IE2; with thermal protection 145 °C; motor without fan; with UL - listed insulation, strands and TW; with terminal box on N (B-side) end shield; 1x EMC screw connection M20/1 x standard screw connection M12; motor suitable for FU operation; Size 71 B14-105 2 603-02217 1 PCS 2-stage planetary gearbox type planetdrive PD085 Order code: PD085-enc028-1aj1 Reduction: i = 28 Twist play:

consisting of: --------------------- a) Three-phase motor "IE3" b) Control gear "p l a r o m a s t e r" Technical specifications ------------------------ Control element: right Design: B14 (motor terminal box on the left) Installation position: 4 (V1) Speed range: 0 to approx. 1200 rpm (50 Hz mains) Output torque: approx. 20 Nm from 20 to 715 rpm ATEX version: Ex II 2G Ex h IIB T4 Gb (drive unit) ================================================== == drive components ------------------------------- 1 PIECE drive side three-phase motor 2.2 kW, 2850 rpm, 230/400 V, 50 Hz, IE3, IP 55, Insulation class F, II 2G Ex db eb IIC T4 Gb, PTC thermistor, BG 90, B5/V1-200 with protective cover. 302-040262 1 PC Control gear plaromaster type MR7 on the drive side: for motor mounting BG 90, B5-200 output side: with B14 flange Ø200, output shaft: Ø24h6 x 50 302-038793 1 PC Control element type: HVK 6, hand wheel (d0=70) with fine adjustment scale coarse scale 0 - 12, fine scale 0 - 100 4 1 PCS + Paint RAL 3004 - purple -

Type (1.1D4 (Ex)) MR5-3 (120,19h6x40) consisting of: a) Variable speed gearbox “p l a r o m a s t e r” specifications Control element: right Design: B14 Installation position: 4 Specifications plaromaster without reduction gear Speed range: 0 to approx. 600 rpm Output torque: approx. 14 Nm from 10 to 470 rpm approx. 13 Nm at 600 rpm Technical data including reduction gear (reduction i = 16.46) Speed range: 0 to approx. 36.5 rpm Output torques: approx. 221.2 Nm to 0.6 to 29 rpm approx. 205.4 Nm rpm ATEX - version: Ex II 2G Ex h IIB T4 Gb (variable speed gearbox) Drive components: 302-03276 plaromaster variable speed gearbox type MR5 drive side: for motor mounting, size 80, B14-120 output side: B14 flange dia.120, output shaft dia.19H6 x 40 302-01466 Control element type HVK 5 for AR2-AR5/MR3+MR5: Handwheel (d0 = 50) with fine adjustment scale; coarse scale 0 - 12, fine scale 0 - 100

consisting of: -------------------- a) Control gear "p l a r o m a s t e r" Technical specifications --------------------------------------- Control: Left Design: B14 Installation position: 1 Speed range: 0 to approx. 1200 rpm (50 Hz mains) Output torque: approx. 6 Nm from 20 to 430 rpm approx. 2.25 Nm 1200 rpm (P1 = 0.37kW; n1 = 2800 rpm) Drive Components 302-021251 Control gear plaromaster type MR3 drive side: free drive shaft diam.14h6 x 30 output side: special flange B14-120 according to drawing. 120 330, 4x M8 on TK100 arranged at 45°, Output shaft dia.14h6 x 30

consisting of: --------------------- a) Control gear "p l a r o m a s t e r" Technical specifications --------------------------------------- Control element: right Design: B3 Installation position: 4 Speed range: 0 to approx. 600 rpm (50 Hz mains) Output torque: approx. 3.5 Nm from 20 to 180 rpm approx. 1.2 Nm at 600 rpm (P1 = 0.09kW n1 = 1400 l/min) drive components ------------------------------- 302-004811 3 PCS Control gear plaromaster type MR1 on the drive side: for motor attachment size 56, B14-80 output side: B14-80, output shaft diameter 9h6 x 20 302-005962 Operating element type: HRN, hand wheel - standard version (D.40) 302-005893 skirting boards (1 pair) 602-088794 + Paint RAL 9006 -white aluminum-

Reduction: i = 28 Backlash:

11k6x23 consisting of: a) Variable speed drive "p l a r o m a s t e r" b) Planetary gearhead Operating element: right hand Mounting design: B3/B14-similar Mounting position: 1 Speed range: 0 to approx. 143,5 r.p.m. (motor connected to 50 Hz system) Output torques: max. 4,5 Nm from 2,6 to 88,3 r.p.m approx. 2,9 Nm at 143,5 r.p.m (P1 = 0,067KW, n1 = 2800 r.p.m) Customs tariff number: 8483 40 59 Drive components 1 302-00006 1 PC Variable speed gearbox plaromaster type MRV Input : free input shaft diam.8h6 x 20 2 302-00017 1 PC foot plate size 1/1N + MRV (high construction) 3 302-00002 1 PC Operating element type: HVN, large scale 0-12, fine scale 0-100 301-00967 1 PC Output: planetary gear type P11-4, construction similar B14, reduction ratio i = 7,667, centring Ø40j6x9, 4x bo.M4x8 on pitch circle diam 52, output shaft Ø 11k6x23, (max.permissible output torque - M2= 4,5 Nm).

602-07722 Variable speed drive unit planetroll consisting of: a) Three-phase motor b) Control gear "p l a r o m a s t e r" Technical specifications Control element: right Design: B14 (motor terminal box on the right) Installation position: 4 (V18) Speed range: 0 to approx. 600 rpm (50 Hz mains) Output torque: approx. 3.5 Nm from 10 to 180 rpm approx. 1.2 Nm at 600 rpm

planetroll plain bearings, consisting of: 1x plain bearing (PTFE-FDA) 3x O-ring (FKM-FDA) 3x O-ring carrier (1.4571) suitable for agitator 601-01386 (item 5 on drawing) 1 204-01050 1 PC 2 405-00525 3 PCS 3 204-01048 1 PC 4 204-01047 2 PCS

planetroll comb stirrer suitable for agitator 601-01386 (item 6 on drawing)

planetroll mechanical seal suitable for agitator 601-01386 (item 7 on drawing)

TYPE : 0,5GN305021-10-2211 (so)