Itron ürünleri Türkiye satışı

DN 25, with absolute encoder and Cyble interface with multifunctional counter mechanical counter with absolute encoder Ac and integrated Cyble interface Integrated Cyble interface for: Cyble 5, Cyble M-Bus v2.0, Cyble Sensor V2, Cyble SC Integrated encoder interface for: ACM 5.6 Radio, ACM SCR, ACM M-Bus, ACM Eco... Simultaneous operation of two Communication modules possible PTB approval number DE-21-MI002-PTB005 No MID approved

without SAV Nominal size: DN80 Pressure stage: PN16 Connection type: DIN PN16 flange Medium: inert gases in accordance with DVGW G260 overall length: 300 mm Max. inlet pressure Pu: 5000 mbar Min. inlet pressure PU: ** mbar Outlet pressure Pds: 300 mbar Spring control range: 200-330 mbar Servomotor: 8 inch Flow rate: ** Nm³/h nozzle: 54 mm SAV upper shutdown: no SAV lower shutdown: no Flow direction: left to right Ambient temperature: -30°C to +60°C Paint: primed Max outlet pressure PDSO: PdS+ 0.6 bar

RR16-80-54-12N-SL- IZN.1 Nominal size: DN80 Pressure stage: PN16 Connection type: DIN PN16 flange Medium: inert gases in accordance with DVGW G260 overall length: 300 mm Max. inlet pressure Pu: 16000 mbar Min. inlet pressure PU: ** mbar Outlet pressure Pds: 110 mbar Spring control range: 100-160 Servomotor: 12 inch Flow rate: ** Nm³/h nozzle: 54 mm SAV upper shutdown: yes Pdso: ** mbar SAV lower shutdown: no Spring control range: 35-250 Direction of flow: right to left or left to right ** Ambient temperature: -30°C to +60°C Paint: primed Max outlet pressure PDSO: PdS+ 0.3 bar

DN 50 Q 3:40 PN 16 Bl. 200 mm Nominal flow rate: Q 3:40 Q 1:0.63 m³/h Start-up: 0.19 m³/h Qmax: 50 m³/h short-term max. load: 90 cbm/h max. pressure loss at Qn: 0.12 bar Max. operating temperature: +30°C Pressure level: PN 10/PN 16 overall length: 200 mm Flange: 4-hole Counter: 6/2 Ratio: R100 MID approval no. LNE-23696-2 Impulse generator: Standard preparation with CYBLE system for retroactive Adaptation of the pulse takers FS-C1 to FS-C4 or wireless module CYBLE RF No: - incl. Fixed-fee conformity assessment

Cyble sensor V2 K = 10 2-wire connection consisting of: - a Cyble sensor V2 (K=10) - a screw to fix the Cyble on the counter - two seals (one seal as a replacement) to seal the fixing screw - assembly instructions Impulse value: FLOSTAR-M DN50-DN100, Woltext DN50-DN125: 100 litres/pulse FLOSTAR-M DN150, Woltex DN150:1000 litres/pulse AQUADIS Q 3:2.5 to Q 3:16:10 litres/pulse 2-wire version (reverse polarity protected) Detection and compensation of Backflow volume = 100% Synchronization between electronics and water meter. Internal lithium battery (>12 years) Max. switching voltage: 30 Volt/100 mA Waterproof IP 68 Molded cable 5 meters Assembly without damaging the seal

G0643 G25, double socket, DN 50 Gas meter, screwed, HTB, MID Socket spacing 335 mm Approval No. DE-10-MI002-PTB010 Revision number: 1 No - MID tested -

SL7000 COUNTER: CT SL761W071 - CL. 0.2 - class 0.2S for active energy, (EN50470-3), class 2 for reactive energy, (IEC6205-23). The meters reach the class 1 for reactive energy (nominal conditions of operation and range In 0.05In÷ Imax, with sin f=1). - insertion on TA and TV or on TA with 3 or 4 wires - In: 1 (10) A - One: 3x57.7 (100) V ÷ 3x230 (400) V programmable - Fan: 50 Hz - Uaux: 60÷344 Vdc or 48÷288 Vac autoranging - Auxiliary and pulse I/O in full configuration - output ports: 1 RS232 + 1 RS485 by: KGFACCB3GKF-IT001

DELTA Compact no HTB version Nominal size: DN 40 Pressure stage: PN16 Connection: IG 1 1/2" overall length: 121 mm Material: aluminum Gas type: according to DVGW worksheet G260 Reading direction: front reading Flow direction: freely selectable** prepared for 1 L2 diving sleeve (**when fitted with diving sleeves, direction of flow please specify) Measurement range: 1:20 (max. possible measurement range 1:160 — for an additional charge available) Pulse generator: 2x LF pulse generator + anti- Manipulation contact Pulse value: 0.01 cbm/pulse Plug: Binder male 1x Ermeto EO 6S PR socket Operating temperature: -25°C to +55°C (after MID) Varnishing: without PTB approval number DE-17-MI002-PTB001 No MID approved

H0342 Impulse receiver 951-858-04 for Balgengasz. with approx. 1 m cable, for RF 1 counter Possible momentum values: G 4/G 6 0.01 m³/pulse G 10 - G 65 0.1 m³/pulse G 100 1.0 m³/pulse

G100 DN 80 DELTA Silver Edition no HTB version Nominal size: DN 80 Pressure stage: PN16 Connection: DIN PN10/PN16 flange overall length: 171 mm Material: aluminum Gas type: according to DVGW worksheet G260 Reading direction: front reading Flow direction: freely selectable** prepared for 2 L4 diving pods (**when fitted with diving sleeves, direction of flow please specify) Measurement range: 1:20 (max. possible measurement range 1:160 — for an additional charge available) Pulse generator: 2x LF pulse generator + anti- Manipulation contact Pulse value: 0.1 cbm/pulse Plug: Binder male 2x Ermeto EO 6S PR sockets Operating temperature: -25°C to +55°C (after MID) Varnishing: without PTB approval number DE-17-MI002-PTB001 No MID approved

Nominal size: DN 80 Pressure stage: PN16 Connection: DIN flange overall length: 240 mm Material: ductile iron Gas type: according to DVGW worksheet G260 Reading direction: front reading Flow direction: freely selectable prepared for 2 diving pods (when fitted with diving sleeves, direction of flow please specify) Measurement range: 1:20 (max. possible measurement range 1:30 (ND) or 1:50 (HD) available for an additional charge) Pulse generator: 2x LF pulse generator + anti- Manipulation contact Pulse value: 1 cbm/pulse Plug: Binder male 2x Ermeto EO 6S PR sockets Type of lubrication: permanently lubricated (oil pump available at an additional cost) Operating temperature: -25°C to +55°C (after MID) Coating: water-based paint similar to RAL7035 PTB approval number DE-10-MI002-PTB001 Revision number: 2 No MID approved

for RR 16-25-31-8N-033 DN25 PN16/5 valve

DN 50 PN16 SRV+SSV GGG40 REGULATOR O:25mm

three-phase