Elster ürünleri Türkiye satışı

47104010 For non-compulsory gas quantity metering, display of Spent quantity, with pulse generators E1 and E200 Nominal flow rate: 400 m3/h Measurement range 32-650 m3/h (b) intermediate flange DN 100, E1:1 imp/m3, E 200:187.5 imp/m3 PU max. 4 bar, for gas and air

47106550 For non-compulsory gas quantity metering, display of Spent quantity, with pulse generators E1 and E200 Nominal flow rate: 65 m3/h Measurement range 6-100 m3/h (b) intermediate flange DN 50, E1:1 imp/m3, E 200:250 imp/m3 PU max. 4 bar, for gas and air

with balance valve and safety shut-off valve - for 63 nm3 / h, with SAV, Rvh = 500 mbar, Rizh = 150 mbar, spring 100-300 mbar, SAV 225 mbar

Fabr. Elster Flanschanschlüsse DN 50, PN 16 Eingangsdruck Pu max. 6 bar Standardeinstellung Ausgangsdruck pd 150 mbar SAV für oberen Auslösedruck SAVo eingestellt auf pso 225 mbar SBV-blockiert + HON 915 Baulänge 220 mm HTB Ausführung

water meter for horizontal installation type: MT-D-K Qn 10 length 300 mm PN 16 R 1 1/2" AG G 2 "B temperature max. + 30°C safety up to + 50°C reed contactor with cable 1 contact - 1 litre No.: factory tested

Stecker 6-polig E1 NF-Impulsgeber f. RVG G10-25, für IN-S11, IN-S12, INS-W11

PILOT 100 to 225 lbs range, 1480 lbs max pressure.

Nominal size: DN300 (12") Ua value: 10 m3 G value: G 1600 Measurement range: 1:20 Approval: factory test Measurement accuracy: EN 12261, standard Customer specification: None Design Code: ASME B31.8 Class 2 Safety approval: ATEX + IECEx + PED (STD) Q-max (m3/h): 2,500 Q-min (m3/h): 130.00 Case material: Forged steel (LT) Pressure level: Class 150 Flange sealing surface: RF smooth finish (std) Pressure unit: bar Medium: natural gas Finish: standard (RAL 1004) Max. operating temperature (°C): 70 Minimum operating temperature (°C): -25 Pmax (bar) design: 18.6 Paddle wheel material: aluminum Shovel angle: 45 degrees Flow rate: from left to right Pressure measurement point Pr/Pm: HD valves 2-way 2xEO6 Number of pressure reference ports 2 Lubrication system: oil pump (standard) Flow body: X4X-Alu. (Front) /Steel (Back) Temperature measurement point: 1x HF paddle wheel: 1x HF reference disk: 1x HF transmitter connection: plug (hrs) Spin-down setup: No Counter head: MI-2 with encoder (std) Encoder interface: NAMUR (hrs) Ventilated counter head: No (with silica gel) Cryo or extension: None Counter head connection type: 1 6-PIN SOCKET. IN-S11 Acceptance (customer approval): No Test type ND: factory test Test type HD: without high-pressure test Test with track: No Inspection certificate: EN 10204-3.1 Calibration/Calibration Certificate: ND test Material certificate: No Inspection\ Documentation: ATEX certificate (DoC) language: English Property sign: No Manufacturer ID according to DIN 43863-5 Yes Data chip RFID tag: No Electronic device structure: None Packaging: box in accordance with ISPM guidelines High temperature auxiliary feature: standard (<120°) Surface Treatment: 0000-PSB30.014- (REV-10) SURFACE TREATMENT STEEL BODIES RAL 1004 Inspection Testing: 0000-PSB38.012- (REV-02) INSPECTION AND TESTING (HRS) Material requirements: 0000-PSB38.014- (REV-02) MATERIAL REQUIREMENTS (HRS) Material spec forging: 0001-TN11.466- (REV-02) MATERIAL SPEC. FORGING A350LF2 CLASS 1 Position: 0005--Pos.5A: 1st HF turbine wheel, 0014--Pos.14A: 1st HF reference Disc, 0015--Pos.15A: 1st Thermowell Certificate Strength Test: 0191--Certificate of Strength Test (water) Eyebolt: 0010-807.12.580-Eyebolt M12 C15 (DIN 580) Zinced Qty 2

MID volume and temperature corrector mod. EK220 0.8÷5 bar PT1000 N.B.: the offer is not included in the offer assembly, activation, final calibration + configuring parameters (operation) necessary for operation of the apparatus) + programming and verification First in the field; everything to be listed separately based on location of the plant

Q250 DN100 PN 16 LF PLUS SOKET TENDERNESS: 1/20

PSET: 40 - 60 MBAR

AC 10/SG 20 PS 6bar, WH: 20-300mbar, PDS: 100mbar

HB 7 - 3" DN 80 / ANSI 300