Buschjost ürünleri Türkiye satışı

Model series 82960 Description 2/2-way filter solenoid valve Type diaphragm valve Control indirectly controlled G 1 1/2 connector Nominal diameter 40 mm Pressure range 0.4 - 8 bar Electrical device socket Form A kV value 59 m³/h Crude gas temp. -40°C to +85°C Temperature environment -20°C to +85°C Flushing gas temp. -40°C to +85°C CCSAUS environment 65°C Voltage 24 V Frequency 00 Hz Protection type IP 65 Suit 12 W 12 W recording Duration 100% Any type of installation, preferably electrical Magnet vertically upwards Aluminium steel housing TPE water seal Switch function closed in idle position Additional information magnet with CSA approval mark in accordance with C/US standards The delivery includes product information attached. This product contains wear and tear Divide them depending on the use, are subject to wear and tear. Medium group 2 - harmless (DGRL)

Diaphragm valve Forced control connection G 2 nominal width 50 mm Pressure range 0 - 16 bar Electr.extr. connector form A built-in rectifier kV-value 41 m³/h Temperature medium -10 to +90°C Temperature environment -10 to +50°C voltage 230 V frequency 40 - 60 Hz Protection type IP 65 Aufn.Suit 42 VA Operation 42 VA Inclusion duration 100% Any installation method, preferably electromagnet vertically upwards Wst. housing brass Wst. seal NBR Switching function closed in idle position Additional info Magnet with CSA test mark in accordance with C/US standards THERE IS CURRENTLY NO CSA APPROVAL BEFORE!!! The delivery includes product information attached. This product contains consumables which depends on the application, are subject to wear and tear. Valve including solenoid coil!!!

Model series 86720 Description 2/2-way solenoid valve Type piston valve Force-controlled control G 1 connector Nominal diameter 25 mm Pressure range 0 - 16 bar Electrical device socket Form A for higher temperature kV value 10 m³/h Temp.Medium 0 to +200°C Temperature environment 0 to +60°C Voltage 24 V Frequency 00 Hz Protection type IP 65 29 W Aufn.Suit 29 W recording Duration 100% How to install the electromagnet vertically upwards Brass steel housing PTFE seal Seat tightness DIN EN 12266-1 leak rate E Switch function closed in idle position Additional information When operating in 'cold' mode, you can low leakages between housings and lids occur. Extended switching times with Putting a not heated valve. The delivery includes product information attached. This product contains wear and tear Divide them depending on the use, are subject to wear and tear.

Model series 82540 Description 2/2-way solenoid valve type diaphragm valve Force-controlled control G 1/4 connection Nominal diameter 8 mm Pressure range 0 - 10 bar Electrical outlet type A kV value 1.90 m³/h Temp.Medium -10 to +90°C Temperature environment -10 to +50°C Voltage 24 V Frequency 00 Hz Protection type IP 65 18 W power supply Operating mode 18 W Including duration 100% Any installation method, preferably electrical Magnet vertically upwards Brass wst. housing NBR water seal Switch function closed in rest position Additional information magnet with CSA test mark in accordance with C/US standards The delivery is product information attached. This product contains wear and tear Share them depending on the use, are subject to wear and tear.

d-32545 230V 40-60Hz 20VA PA 0-16bar

d-32545 230V 40-60Hz 42VA/38W 0-10bar

Description Stepper motor drive 9678 Description Stepper motor drive 24V = Voltage 24 V Frequency 00 Hz CHUTZ type IP 54 3.3 W operating mode Additional info stepper motor, running time for 90 degree adjustment angle 10 to 11 s, integrated positioner, Setpoint specification 0 - 10V, 0 - 20 mA or 4 - 20 mA Analog output 0 - 20 mA/ 4 - 20 mA Delivery condition S1=OFF, S2=OFF: Setpoint specification 0-10 V Analog output 0-20 mA Electr. 5-pin connection M12 plug

2/2 NC STAINLESS 3/4INCH 0-10BAR

Model series 82400 Description 2/2-way solenoid valve Type diaphragm valve Control controlled indirectly G 1 connection Nominal diameter 25 mm Pressure range 0.1 - 16 bar Electrical outlet type A kV value 9.50 m³/h Medium temperature -10 to +90°C Ambient temperature -10 to +50°C Voltage 24 V Frequency 00 Hz Protection class IP 65 Suit 8 W 8 W operating mode Including duration 100% Any installation option, preferably electrical Magnet vertically upwards Brass wst housing NBR water seal Switch function closed in rest position Mechanical and manual control Additional info Magnet with CSA approval mark in accordance with